On Mon, Mar 12, 2012 at 2:00 PM, Tristan Gingold <ging...@adacore.com> wrote:
> Hi,
>
> this patch merges Alpha/VMS and IA-64/VMS options as there is only one .opt
> for them, so there is no need to duplicate the doc.
>
> It also documents -mpointer-size.
>
> Tested by 'make info'
>
> Ok for trunk ?
Ok.
Thanks,
Richard.
> Tristan.
>
> 2012-03-12 Tristan Gingold <ging...@adacore.com>
>
> * doc/invoke.texi (VMS Options): Merge Alpha/VMS and IA-64/VMS
> Options. Mention -mpointer-size.
>
> diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
> index a1196f0..2378ba5 100644
> --- a/gcc/doc/invoke.texi
> +++ b/gcc/doc/invoke.texi
> @@ -569,9 +569,6 @@ Objective-C and Objective-C++ Dialects}.
> -msmall-text -mlarge-text @gol
> -mmemory-latency=@var{time}}
>
> -@emph{DEC Alpha/VMS Options}
> -@gccoptlist{-mvms-return-codes -mdebug-main=@var{prefix} -mmalloc64}
> -
> @emph{FR30 Options}
> @gccoptlist{-msmall-model -mno-lsim}
>
> @@ -669,9 +666,6 @@ Objective-C and Objective-C++ Dialects}.
> -msel-sched-dont-check-control-spec -msched-fp-mem-deps-zero-cost @gol
> -msched-max-memory-insns-hard-limit -msched-max-memory-insns=@var{max-insns}}
>
> -@emph{IA-64/VMS Options}
> -@gccoptlist{-mvms-return-codes -mdebug-main=@var{prefix} -mmalloc64}
> -
> @emph{LM32 Options}
> @gccoptlist{-mbarrel-shift-enabled -mdivide-enabled -mmultiply-enabled @gol
> -msign-extend-enabled -muser-enabled}
> @@ -946,6 +940,10 @@ See RS/6000 and PowerPC Options.
> @emph{VAX Options}
> @gccoptlist{-mg -mgnu -munix}
>
> +@emph{VMS Options}
> +@gccoptlist{-mvms-return-codes -mdebug-main=@var{prefix} -mmalloc64 @gol
> +-mpointer-size=@var{size}}
> +
> @emph{VxWorks Options}
> @gccoptlist{-mrtp -non-static -Bstatic -Bdynamic @gol
> -Xbind-lazy -Xbind-now}
> @@ -4816,8 +4814,8 @@ Allow using extensions of later DWARF standard version
> than selected with
>
> @item -gvms
> @opindex gvms
> -Produce debugging information in VMS debug format (if that is
> -supported). This is the format used by DEBUG on VMS systems.
> +Produce debugging information in Alpha/VMS debug format (if that is
> +supported). This is the format used by DEBUG on Alpha/VMS systems.
>
> @item -g@var{level}
> @itemx -ggdb@var{level}
> @@ -10331,7 +10329,6 @@ platform.
> * CR16 Options::
> * Darwin Options::
> * DEC Alpha Options::
> -* DEC Alpha/VMS Options::
> * FR30 Options::
> * FRV Options::
> * GNU/Linux Options::
> @@ -10340,7 +10337,6 @@ platform.
> * i386 and x86-64 Options::
> * i386 and x86-64 Windows Options::
> * IA-64 Options::
> -* IA-64/VMS Options::
> * LM32 Options::
> * M32C Options::
> * M32R/D Options::
> @@ -10368,6 +10364,7 @@ platform.
> * TILEPro Options::
> * V850 Options::
> * VAX Options::
> +* VMS Options::
> * VxWorks Options::
> * x86-64 Options::
> * Xstormy16 Options::
> @@ -12392,27 +12389,6 @@ Note that L3 is only valid for EV5.
> @end table
> @end table
>
> -@node DEC Alpha/VMS Options
> -@subsection DEC Alpha/VMS Options
> -
> -These @samp{-m} options are defined for the DEC Alpha/VMS implementations:
> -
> -@table @gcctabopt
> -@item -mvms-return-codes
> -@opindex mvms-return-codes
> -Return VMS condition codes from main. The default is to return POSIX
> -style condition (e.g.@: error) codes.
> -
> -@item -mdebug-main=@var{prefix}
> -@opindex mdebug-main=@var{prefix}
> -Flag the first routine whose name starts with @var{prefix} as the main
> -routine for the debugger.
> -
> -@item -mmalloc64
> -@opindex mmalloc64
> -Default to 64-bit memory allocation routines.
> -@end table
> -
> @node FR30 Options
> @subsection FR30 Options
> @cindex FR30 Options
> @@ -14325,27 +14301,6 @@ be scheduled.
>
> @end table
>
> -@node IA-64/VMS Options
> -@subsection IA-64/VMS Options
> -
> -These @samp{-m} options are defined for the IA-64/VMS implementations:
> -
> -@table @gcctabopt
> -@item -mvms-return-codes
> -@opindex mvms-return-codes
> -Return VMS condition codes from @code{main}. The default is to return
> POSIX-style
> -condition (e.g.@ error) codes.
> -
> -@item -mdebug-main=@var{prefix}
> -@opindex mdebug-main=@var{prefix}
> -Flag the first routine whose name starts with @var{prefix} as the main
> -routine for the debugger.
> -
> -@item -mmalloc64
> -@opindex mmalloc64
> -Default to 64-bit memory allocation routines.
> -@end table
> -
> @node LM32 Options
> @subsection LM32 Options
> @cindex LM32 options
> @@ -18939,6 +18894,34 @@ will assemble with the GNU assembler.
> Output code for G-format floating-point numbers instead of D-format.
> @end table
>
> +@node VMS Options
> +@subsection VMS Options
> +
> +These @samp{-m} options are defined for the VMS implementations:
> +
> +@table @gcctabopt
> +@item -mvms-return-codes
> +@opindex mvms-return-codes
> +Return VMS condition codes from @code{main}. The default is to return
> POSIX-style
> +condition (e.g.@ error) codes.
> +
> +@item -mdebug-main=@var{prefix}
> +@opindex mdebug-main=@var{prefix}
> +Flag the first routine whose name starts with @var{prefix} as the main
> +routine for the debugger.
> +
> +@item -mmalloc64
> +@opindex mmalloc64
> +Default to 64-bit memory allocation routines.
> +
> +@item -mpointer-size=@var{size}
> +@opindex -mpointer-size=@var{size}
> +Set the default size of pointers. Possible options for @var{size} are
> +@samp{32} or @samp{short} for 32 bit pointers, @samp{64} or @samp{long}
> +for 64 bit pointers, and @samp{no} for supporting only 32 bit pointers.
> +The later option disables @code{pragma pointer_size}.
> +@end table
> +
> @node VxWorks Options
> @subsection VxWorks Options
> @cindex VxWorks Options
