On Tue, Jan 19, 2021 at 8:32 PM Hongtao Liu via Gcc-patches
<gcc-patches@gcc.gnu.org> wrote:
>
> On Wed, Jan 20, 2021 at 12:10 AM Richard Sandiford
> <richard.sandif...@arm.com> wrote:
> >
> > Jakub Jelinek via Gcc-patches <gcc-patches@gcc.gnu.org> writes:
> > > On Tue, Jan 19, 2021 at 12:38:47PM +0000, Richard Sandiford via
> > > Gcc-patches wrote:
> > >> > actually only the lower 16bits are needed, the original insn is like
> > >> >
> > >> > .294.r.ira
> > >> > (insn 69 68 70 13 (set (reg:HI 96 [ _52 ])
> > >> > (subreg:HI (reg:DI 82 [ var_6.0_1 ]) 0)) "test.c":21:23 76
> > >> > {*movhi_internal}
> > >> > (nil))
> > >> > (insn 78 75 82 13 (set (reg:V4HI 140 [ _283 ])
> > >> > (vec_duplicate:V4HI (truncate:HI (subreg:SI (reg:HI 96 [ _52
> > >> > ]) 0)))) 1412 {*vec_dupv4hi}
> > >> > (nil))
> > >> >
> > >> > .295r.reload
> > >> > (insn 69 68 70 13 (set (reg:HI 5 di [orig:96 _52 ] [96])
> > >> > (reg:HI 68 k0 [orig:82 var_6.0_1 ] [82])) "test.c":21:23 76
> > >> > {*movhi_internal}
> > >> > (nil))
> > >> > (insn 489 75 78 13 (set (reg:SI 22 xmm2 [297])
> > >> > (reg:SI 5 di [orig:96 _52 ] [96])) 75 {*movsi_internal}
> > >> > (nil))
> > >> > (insn 78 489 490 13 (set (reg:V4HI 20 xmm0 [orig:140 _283 ] [140])
> > >> > (vec_duplicate:V4HI (truncate:HI (reg:SI 22 xmm2 [297]))))
> > >> > 1412 {*vec_dupv4hi}
> > >> > (nil))
> > >> >
> > >> > and insn 489 is created by lra/reload which seems ok for the sequence,
> > >> > but problemistic with considering the logic of hardreg_cprop.
> > >>
> > >> It looks OK even with the regcprop behaviour though:
> > >>
> > >> - insn 69 defines only the low 16 bits of di,
> > >> - insn 489 defines only the low 16 bits of xmm2, but copies bits 16-31
> > >> too (with unknown contents)
> > >> - insn 78 uses only the low 16 bits of xmm2 (the unknown contents
> > >> introduced by insn 489 are truncated away)
> > >>
> > >> So where do bits 16-31 become significant? What goes wrong if they're
> > >> not zero?
> > >
> > > The k0 register is initialized I believe with
> > > (insn 20 2 21 2 (set (reg:DI 68 k0 [orig:82 var_6.0_1 ] [82])
> > > (mem/c:DI (symbol_ref:DI ("var_6") [flags 0x40] <var_decl
> > > 0x7f7babeaaf30 var_6>) [3 var_6+0 S8 A64])) "pr98694.C":21:10 74
> > > {*movdi_internal}
> > > (nil))
> > > and so it contains all 64-bits, and then the code sometimes uses all the
> > > bits, sometimes just the low 16-bits and sometimes low 32-bits of that
> > > value.
> > > (insn 69 68 70 12 (set (reg:HI 5 di [orig:96 _52 ] [96])
> > > (reg:HI 68 k0 [orig:82 var_6.0_1 ] [82])) "pr98694.C":27:23 76
> > > {*movhi_internal}
> > > (nil))
> > > (insn 74 73 75 12 (set (reg:SI 36 r8 [orig:149 _52 ] [149])
> > > (zero_extend:SI (reg:HI 68 k0 [orig:82 var_6.0_1 ] [82]))) 144
> > > {*zero_extendhisi2}
> > > (nil))
> > > (insn 489 75 78 12 (set (reg:SI 22 xmm2 [297])
> > > (reg:SI 5 di [orig:96 _52 ] [96])) 75 {*movsi_internal}
> > > (nil))
> > > (insn 78 489 490 12 (set (reg:V4HI 20 xmm0 [orig:140 _283 ] [140])
> > > (vec_duplicate:V4HI (truncate:HI (reg:SI 22 xmm2 [297])))) 1412
> > > {*vec_dupv4hi}
> > > (expr_list:REG_DEAD (reg:SI 22 xmm2 [297])
> > > (nil)))
> > > are examples when it uses only the low 16 bits from that, and
> > > (insn 487 72 73 12 (set (reg:SI 1 dx [148])
> > > (reg:SI 68 k0 [orig:82 var_6.0_1 ] [82])) 75 {*movsi_internal}
> > > (nil))
> > >
> > > (insn 85 84 491 13 (set (reg:SI 37 r9 [orig:86 _11 ] [86])
> > > (reg:SI 68 k0 [orig:82 var_6.0_1 ] [82])) "pr98694.C":28:14 75
> > > {*movsi_internal}
> > > (nil))
> > >
> > > (insn 491 85 88 13 (set (reg:SI 3 bx [299])
> > > (reg:SI 68 k0 [orig:82 var_6.0_1 ] [82])) 75 {*movsi_internal}
> > > (nil))
> > > (insn 88 491 89 13 (set (reg:CCNO 17 flags)
> > > (compare:CCNO (reg:SI 3 bx [299])
> > > (const_int 0 [0]))) 7 {*cmpsi_ccno_1}
> > > (expr_list:REG_DEAD (reg:SI 3 bx [299])
> > > (nil)))
> > >
> > > (insn 457 499 460 33 (set (reg:SI 39 r11 [orig:86 _11 ] [86])
> > > (reg:SI 37 r9 [orig:86 _11 ] [86])) "pr98694.C":35:36 75
> > > {*movsi_internal}
> > > (expr_list:REG_DEAD (reg:SI 37 r9 [orig:86 _11 ] [86])
> > > (nil)))
> > > are examples where it uses low 32-bits from k0.
> > > So the
> > > (insn 457 499 460 33 (set (reg:SI 39 r11 [orig:86 _11 ] [86])
> > > - (reg:SI 37 r9 [orig:86 _11 ] [86])) "pr98694.C":35:36 75
> > > {*movsi_internal}
> > > - (expr_list:REG_DEAD (reg:SI 37 r9 [orig:86 _11 ] [86])
> > > + (reg:SI 22 xmm2 [orig:86 _11 ] [86])) "pr98694.C":35:36 75
> > > {*movsi_internal}
> > > + (expr_list:REG_DEAD (reg:SI 22 xmm2 [orig:86 _11 ] [86])
> > > (nil)))
> > > cprop_hardreg change indeed looks bogus, while xmm2 has SImode, it holds
> > > only the low 16-bits of the value and has the upper bits undefined, while
> > > r9
> > > it is replacing had all of the low 32-bits well defined.
> >
> > Ah, ok, thanks for the extra context.
> >
> > So AIUI the problem when recording xmm2<-di isn't just:
> >
> > [A] partial_subreg_p (vd->e[sr].mode, GET_MODE (src))
> >
> > but also that:
> >
> > [B] partial_subreg_p (vd->e[sr].mode, vd->e[vd->e[sr].oldest_regno].mode)
> >
> > For example, all registers in this sequence can be part of the same chain:
> >
> > (set (reg:HI R1) (reg:HI R0))
> > (set (reg:SI R2) (reg:SI R1)) // [A]
> > (set (reg:DI R3) (reg:DI R2)) // [A]
> > (set (reg:SI R4) (reg:SI R[0-3]))
> > (set (reg:HI R5) (reg:HI R[0-4]))
> >
> > But:
> >
> > (set (reg:SI R1) (reg:SI R0))
> > (set (reg:HI R2) (reg:HI R1))
> > (set (reg:SI R3) (reg:SI R2)) // [A] && [B]
> >
> > is problematic because it dips below the precision of the oldest regno
> > and then increases again.
> >
> > When this happens, I guess we have two choices:
> >
> > (1) what the patch does: treat R3 as the start of a new chain.
> > (2) pretend that the copy occured in vd->e[sr].mode instead
> > (i.e. copy vd->e[sr].mode to vd->e[dr].mode)
> >
> > I guess (2) would need to be subject to REG_CAN_CHANGE_MODE_P.
> > Maybe the optimisation provided by (2) compared to (1) isn't common
> > enough to be worth the complication.
> >
> > I think we should test [B] as well as [A] though. The pass is set
> > up to do some quite elaborate mode changes and I think rejecting
> > [A] on its own would make some of the other code redundant.
> > It also feels like it should be a seperate “if” or “else if”,
> > with its own comment.
> >
> Update patch.
> > Thanks,
> > Richard
+int main ()
+{
Please add __builtin_cpu_supports ("avx512bw") check.
+ __m512i src1 = _mm512_setzero_si512 ();
+ __m512i src2 = _mm512_set_epi8 (0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1,
+ 0, 1, 0, 1, 0, 1, 0, 1);
+ __mmask64 m = _mm512_cmpeq_epu8_mask (src1, src2);
+ v2si a = foo (src1, src2);
+ if (a[0] != (int)m)
+ __builtin_abort ();
+ return 0;
+}
--
H.J.
