On Fri, 2018-06-01 at 08:53 +0200, Richard Biener wrote:
> On Thu, May 31, 2018 at 9:59 PM Will Schmidt <[email protected]>
> wrote:
> >
> > Hi,
> > Add support for gimple folding for unaligned vector loads and stores.
> > testcases posted separately in this thread.
> >
> > Regtest completed across variety of systems, P6,P7,P8,P9.
> >
> > OK for trunk?
> > Thanks,
> > -Will
> >
> > [gcc]
> >
> > 2018-05-31 Will Schmidt <[email protected]>
> >
> > * config/rs6000/rs6000.c: (rs6000_builtin_valid_without_lhs) Add
> > vec_xst
> > variants to the list. (rs6000_gimple_fold_builtin) Add support for
> > folding unaligned vector loads and stores.
> >
> > diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
> > index d62abdf..54b7de2 100644
> > --- a/gcc/config/rs6000/rs6000.c
> > +++ b/gcc/config/rs6000/rs6000.c
> > @@ -15360,10 +15360,16 @@ rs6000_builtin_valid_without_lhs (enum
> > rs6000_builtins fn_code)
> > case ALTIVEC_BUILTIN_STVX_V8HI:
> > case ALTIVEC_BUILTIN_STVX_V4SI:
> > case ALTIVEC_BUILTIN_STVX_V4SF:
> > case ALTIVEC_BUILTIN_STVX_V2DI:
> > case ALTIVEC_BUILTIN_STVX_V2DF:
> > + case VSX_BUILTIN_STXVW4X_V16QI:
> > + case VSX_BUILTIN_STXVW4X_V8HI:
> > + case VSX_BUILTIN_STXVW4X_V4SF:
> > + case VSX_BUILTIN_STXVW4X_V4SI:
> > + case VSX_BUILTIN_STXVD2X_V2DF:
> > + case VSX_BUILTIN_STXVD2X_V2DI:
> > return true;
> > default:
> > return false;
> > }
> > }
> > @@ -15869,10 +15875,77 @@ rs6000_gimple_fold_builtin (gimple_stmt_iterator
> > *gsi)
> > gimple_set_location (g, loc);
> > gsi_replace (gsi, g, true);
> > return true;
> > }
> >
> > + /* unaligned Vector loads. */
> > + case VSX_BUILTIN_LXVW4X_V16QI:
> > + case VSX_BUILTIN_LXVW4X_V8HI:
> > + case VSX_BUILTIN_LXVW4X_V4SF:
> > + case VSX_BUILTIN_LXVW4X_V4SI:
> > + case VSX_BUILTIN_LXVD2X_V2DF:
> > + case VSX_BUILTIN_LXVD2X_V2DI:
> > + {
> > + arg0 = gimple_call_arg (stmt, 0); // offset
> > + arg1 = gimple_call_arg (stmt, 1); // address
> > + lhs = gimple_call_lhs (stmt);
> > + location_t loc = gimple_location (stmt);
> > + /* Since arg1 may be cast to a different type, just use
> > ptr_type_node
> > + here instead of trying to enforce TBAA on pointer types. */
> > + tree arg1_type = ptr_type_node;
> > + tree lhs_type = TREE_TYPE (lhs);
> > + /* POINTER_PLUS_EXPR wants the offset to be of type 'sizetype'.
> > Create
> > + the tree using the value from arg0. The resulting type will
> > match
> > + the type of arg1. */
> > + gimple_seq stmts = NULL;
> > + tree temp_offset = gimple_convert (&stmts, loc, sizetype, arg0);
> > + tree temp_addr = gimple_build (&stmts, loc, POINTER_PLUS_EXPR,
> > + arg1_type, arg1, temp_offset);
> > + gsi_insert_seq_before (gsi, stmts, GSI_SAME_STMT);
> > + /* Use the build2 helper to set up the mem_ref. The MEM_REF could
> > also
> > + take an offset, but since we've already incorporated the offset
> > + above, here we just pass in a zero. */
> > + gimple *g;
> > + g = gimple_build_assign (lhs, build2 (MEM_REF, lhs_type, temp_addr,
> > + build_int_cst (arg1_type,
> > 0)));
>
> So in GIMPLE the type of the MEM_REF specifies the alignment so my question
> is what type does the lhs usually have here? I'd simply guess V4SF, etc.? In
yes. (double-checking). my reference for the intrinsic signatures
shows the lhs is a vector of type. The rhs can be either *type or
*vector of type.
vector double vec_vsx_ld (int, const vector double *);
vector double vec_vsx_ld (int, const double *);
With similar/same for the assorted other types.
These are also on my list as 'unaligned' vector loads. I'm not certain
if that adds a twist to how I should answer the below..
Bill?
> this case you are missing a
> tree ltype = build_aligned_type (lhs_type, desired-alignment);
>
> and use that ltype for building the MEM_REF. I suppose in this case the known
> alignment is either BITS_PER_UNIT or element alignment (thus
> TYPE_ALIGN (TREE_TYPE (lhs_type)))?
I'd think element alignment. but no longer certain. :-)
> Or is the type of the load the element types?
So, In any case.. I'll build up / modify some tests to look at data
being loaded, and see if I can see alignment issues here.
Thanks,
-Will
> Richard.
>
> > + gimple_set_location (g, loc);
> > + gsi_replace (gsi, g, true);
> > + return true;
> > + }
> > +
> > + /* unaligned Vector stores. */
> > + case VSX_BUILTIN_STXVW4X_V16QI:
> > + case VSX_BUILTIN_STXVW4X_V8HI:
> > + case VSX_BUILTIN_STXVW4X_V4SF:
> > + case VSX_BUILTIN_STXVW4X_V4SI:
> > + case VSX_BUILTIN_STXVD2X_V2DF:
> > + case VSX_BUILTIN_STXVD2X_V2DI:
> > + {
> > + arg0 = gimple_call_arg (stmt, 0); /* Value to be stored. */
> > + arg1 = gimple_call_arg (stmt, 1); /* Offset. */
> > + tree arg2 = gimple_call_arg (stmt, 2); /* Store-to address. */
> > + location_t loc = gimple_location (stmt);
> > + tree arg0_type = TREE_TYPE (arg0);
> > + /* Use ptr_type_node (no TBAA) for the arg2_type. */
> > + tree arg2_type = ptr_type_node;
> > + /* POINTER_PLUS_EXPR wants the offset to be of type 'sizetype'.
> > Create
> > + the tree using the value from arg0. The resulting type will
> > match
> > + the type of arg2. */
> > + gimple_seq stmts = NULL;
> > + tree temp_offset = gimple_convert (&stmts, loc, sizetype, arg1);
> > + tree temp_addr = gimple_build (&stmts, loc, POINTER_PLUS_EXPR,
> > + arg2_type, arg2, temp_offset);
> > + /* Mask off any lower bits from the address. */
> > + gsi_insert_seq_before (gsi, stmts, GSI_SAME_STMT);
> > + gimple *g;
> > + g = gimple_build_assign (build2 (MEM_REF, arg0_type, temp_addr,
> > + build_int_cst (arg2_type, 0)),
> > arg0);
> > + gimple_set_location (g, loc);
> > + gsi_replace (gsi, g, true);
> > + return true;
> > + }
> > +
> > /* Vector Fused multiply-add (fma). */
> > case ALTIVEC_BUILTIN_VMADDFP:
> > case VSX_BUILTIN_XVMADDDP:
> > case ALTIVEC_BUILTIN_VMLADDUHM:
> > {
> >
> >
>
