Hi,
On 2 June 2017 at 16:19, Christophe Lyon <[email protected]> wrote:
> Hi,
>
> I have recently updated the dejagnu version I use for
> cross-testing arm and aarch64 toolchains to 1.6+. One of the side
> effects was mentioned by Jonathan in
> https://gcc.gnu.org/ml/gcc-patches/2017-05/msg01267.html. Since I
> use multilibs to test many configurations, I noticed several
> changes in the results I get.
>
> In particular, on arm-none-linux-gnueabihf with -march=armv5t,
> all the tests that require arm_neon_ok fail to compile because
> they now use -march=armv5t -mfpu=neon -mfloat-abi=softfp
> -march=armv7-a, which leads to a failure to include
> gnu/stubs-soft.h (not present since the target is
> 'hf'). Previously, -march=armv5t was appended, making the tests
> unsupported because -mfpu=neon conflicts with -march=armv5t. Now,
> arm_neon_ok succeeds because it only checks if some preprocessor
> defines are present.
>
> This patch fixes that by including arm_neon.h in arm_neon_ok, such
> that it fails for unsupported cases. However, since most of these
> tests should pass instead of becoming unsupported, I have added flag
> combinations with -mfloat-abi=hard.
>
> However, this is not sufficient to make the
> gcc.target/arm/lto/pr65837* tests pass: they do not require
> arm_neon_ok, and when I tried to add it, they still failed
> because these lto tests do not support dg-add-options. My
> proposal is to add a new
> check_effective_target_arm_neon_ok_no_float_abi function which
> tries to use neon without trying to change the -mfloat-abi
> setting (that is, the same as arm_neon_ok, with only ""
> and "-mfpu=neon" in the list of flags) . This makes these two lto
> tests unsupported for non-hf targets (again because
> gnu/stubs-soft.h is not present).
>
> To make them pass on "hf" targets:
> - I added -mfpu=neon to dg-lto-options in pr65837-attr_0.c,
> because the fpu attributes in arm_neon.h only work if
> -mfpu=neon is enabled
> - I removed dg-suppress-ld-options {-mfpu=neon} from pr65837_0.c,
> -mfpu=neon is needed for the test to compile with toolchains
> where the default fpu is not neon (eg vfpv3-d16-fp16)
>
> On arm-none-linux-gnueabihf --with-cpu=cortex-a9 --with-fpu=vfp
> and multilib test flag=-march=armv5t, this patch brings:
> - 2 UNRESOLVED -> FAIL (gcc.dg/vect/vect-align-1.c)
> - 14 UNRESOLVED -> XPASS (in gcc.dg/vect/)
> - 2765 new PASS
> - 3639 FAIL -> PASS
> - 1826 UNRESOLVED -> PASS
> - 102 UNRESOLVED -> XFAIL
>
> as visible in the red cell at
> http://people.linaro.org/~christophe.lyon/cross-validation/gcc-test-patches/248552-gnu-stubs9.patch/report-build-info.html
> (the build-failed line can be ignored, it was caused by a server
> problem)
>
> Sorry, the explanation is almost longer than the patch :-)
>
> Is it OK for trunk?
> (Just realizing that I forgot to document the new functions :( )
>
Here is an updated version with a bit of documentation for the new
effective target.
arm_neon_ok_no_float_abi now only tries to add -mfpu=neon, not ""
since we always
add -mfpu=neon in the lto tests anyway.
OK?
> Thanks,
>
> Christophe
2017-06-02 Christophe Lyon <[email protected]>
gcc/testsuite/
* lib/target-supports.exp
(check_effective_target_arm_neon_ok_nocache): Add flags with
-mfloat-abi=hard. Include arm_neon.h.
(check_effective_target_arm_neon_ok_no_float_abi_nocache): New.
(check_effective_target_arm_neon_ok_no_float_abi): New.
* gcc.target/arm/lto/pr65837_0.c: Require
arm_neon_ok_no_float_abi. Add -mfpu=neon to dg-lto-options.
* gcc.target/arm/lto/pr65837-attr_0.c: Require
arm_neon_ok_no_float_abi. Remove dg-suppress-ld-options.
gcc/
* doc/sourcebuild.texi (ARM-specific attributes): Document new
arm_neon_ok_no_float_abi effective target.
diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index bb5b6b9..17d5627 100644
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -1582,6 +1582,12 @@ Test system supports executing NEON v2 instructions.
ARM Target supports @code{-mfpu=neon -mfloat-abi=softfp} or compatible
options. Some multilibs may be incompatible with these options.
+@item arm_neon_ok_no_float_abi
+@anchor{arm_neon_ok_no_float_abi}
+ARM Target supports NEON with @code{-mfpu=neon}, but without any
+-mfloat-abi= option. Some multilibs may be incompatible with this
+option.
+
@item arm_neonv2_ok
@anchor{arm_neonv2_ok}
ARM Target supports @code{-mfpu=neon-vfpv4 -mfloat-abi=softfp} or compatible
diff --git a/gcc/testsuite/gcc.target/arm/lto/pr65837-attr_0.c
b/gcc/testsuite/gcc.target/arm/lto/pr65837-attr_0.c
index ebc5f44..f00480b 100644
--- a/gcc/testsuite/gcc.target/arm/lto/pr65837-attr_0.c
+++ b/gcc/testsuite/gcc.target/arm/lto/pr65837-attr_0.c
@@ -1,6 +1,7 @@
/* { dg-lto-do run } */
/* { dg-require-effective-target arm_neon_hw } */
-/* { dg-lto-options {{-flto}} } */
+/* { dg-require-effective-target arm_neon_ok_no_float_abi } */
+/* { dg-lto-options {{-flto -mfpu=neon}} } */
#include "arm_neon.h"
diff --git a/gcc/testsuite/gcc.target/arm/lto/pr65837_0.c
b/gcc/testsuite/gcc.target/arm/lto/pr65837_0.c
index 6b2def9..5d7cea7 100644
--- a/gcc/testsuite/gcc.target/arm/lto/pr65837_0.c
+++ b/gcc/testsuite/gcc.target/arm/lto/pr65837_0.c
@@ -1,7 +1,7 @@
/* { dg-lto-do run } */
/* { dg-require-effective-target arm_neon_hw } */
+/* { dg-require-effective-target arm_neon_ok_no_float_abi } */
/* { dg-lto-options {{-flto -mfpu=neon}} } */
-/* { dg-suppress-ld-options {-mfpu=neon} } */
#include "arm_neon.h"
diff --git a/gcc/testsuite/lib/target-supports.exp
b/gcc/testsuite/lib/target-supports.exp
index ded6383..456d808 100644
--- a/gcc/testsuite/lib/target-supports.exp
+++ b/gcc/testsuite/lib/target-supports.exp
@@ -3434,8 +3434,9 @@ proc check_effective_target_arm_neon_ok_nocache { } {
global et_arm_neon_flags
set et_arm_neon_flags ""
if { [check_effective_target_arm32] } {
- foreach flags {"" "-mfloat-abi=softfp" "-mfpu=neon" "-mfpu=neon
-mfloat-abi=softfp" "-mfpu=neon -mfloat-abi=softfp -march=armv7-a"} {
+ foreach flags {"" "-mfloat-abi=softfp" "-mfpu=neon" "-mfpu=neon
-mfloat-abi=softfp" "-mfpu=neon -mfloat-abi=softfp -march=armv7-a"
"-mfloat-abi=hard" "-mfpu=neon -mfloat-abi=hard" "-mfpu=neon -mfloat-abi=hard
-march=armv7-a"} {
if { [check_no_compiler_messages_nocache arm_neon_ok object {
+ #include <arm_neon.h>
int dummy;
#ifndef __ARM_NEON__
#error not NEON
@@ -3460,6 +3461,38 @@ proc check_effective_target_arm_neon_ok { } {
check_effective_target_arm_neon_ok_nocache]
}
+# Return 1 if this is an ARM target supporting -mfpu=neon without any
+# -mfloat-abi= option. Useful in tests where add_options is not
+# supported (such as lto tests).
+
+proc check_effective_target_arm_neon_ok_no_float_abi_nocache { } {
+ if { [check_effective_target_arm32] } {
+ foreach flags {"-mfpu=neon"} {
+ if { [check_no_compiler_messages_nocache arm_neon_ok_no_float_abi
object {
+ #include <arm_neon.h>
+ int dummy;
+ #ifndef __ARM_NEON__
+ #error not NEON
+ #endif
+ /* Avoid the case where a test adds -mfpu=neon, but the
toolchain is
+ configured for -mcpu=arm926ej-s, for example. */
+ #if __ARM_ARCH < 7 || __ARM_ARCH_PROFILE == 'M'
+ #error Architecture does not support NEON.
+ #endif
+ } "$flags"] } {
+ return 1
+ }
+ }
+ }
+
+ return 0
+}
+
+proc check_effective_target_arm_neon_ok_no_float_abi { } {
+ return [check_cached_effective_target arm_neon_ok_no_float_abi \
+ check_effective_target_arm_neon_ok_no_float_abi_nocache]
+}
+
proc check_effective_target_arm_crc_ok_nocache { } {
global et_arm_crc_flags
set et_arm_crc_flags "-march=armv8-a+crc"
