Gentle ping.
-----Original Message-----
From: Koval, Julia
Sent: Wednesday, April 20, 2016 4:42 PM
To: [email protected]
Cc: Lu, Hongjiu <[email protected]>; [email protected]; [email protected];
[email protected]; Zamyatin, Igor <[email protected]>
Subject: [PATCH] x86 interrupt attribute patch [2/2]
Hi,
Here is the new version of interrupt attribute patch. Bootstraped/regtested for
Linux/x86_64. Ok for trunk?
The interrupt and exception handlers are called by x86 processors. X86
hardware pushes information onto stack and calls the handler. The requirements
are
1. Both interrupt and exception handlers must use the 'IRET' instruction,
instead of the 'RET' instruction, to return from the handlers.
2. All registers are callee-saved in interrupt and exception handlers.
3. The difference between interrupt and exception handlers is the exception
handler must pop 'ERROR_CODE' off the stack before the 'IRET'
instruction.
The design goals of interrupt and exception handlers for x86 processors
are:
1. Support both 32-bit and 64-bit modes.
2. Flexible for compilers to optimize.
3. Easy to use by programmers.
To implement interrupt and exception handlers for x86 processors, a compiler
should support:
'interrupt' attribute
Use this attribute to indicate that the specified function with mandatory
arguments is an interrupt or exception handler. The compiler generates
function entry and exit sequences suitable for use in an interrupt handler when
this attribute is present. The 'IRET' instruction, instead of the 'RET'
instruction, is used to return from interrupt or exception handlers. All
registers, except for the EFLAGS register which is restored by the 'IRET'
instruction, are preserved by the compiler.
If the compiler generates MPX, SSE, MMX or x87 instructions in an interrupt or
exception handler, or functions called from an interrupt or exception handler
may contain MPX, SSE, MMX or x87 instructions, the compiler must save and
restore the corresponding state.
Since the direction flag in the FLAGS register in interrupt (exception)
handlers is undetermined, cld instruction must be emitted in function prologue
if rep string instructions are used in interrupt (exception) handler or
interrupt (exception) handler isn't a leaf function.
Any interruptible-without-stack-switch code must be compiled with -mno-red-zone
since interrupt handlers can and will, because of the hardware design, touch
the red zone.
1. interrupt handler must be declared with a mandatory pointer argument:
struct interrupt_frame;
__attribute__ ((interrupt))
void
f (struct interrupt_frame *frame)
{
...
}
and user must properly define the structure the pointer pointing to.
2. exception handler:
The exception handler is very similar to the interrupt handler with a different
mandatory function signature:
typedef unsigned int uword_t __attribute__ ((mode (__word__)));
struct interrupt_frame;
__attribute__ ((interrupt))
void
f (struct interrupt_frame *frame, uword_t error_code) { ...
}
and compiler pops the error code off stack before the 'IRET' instruction.
The exception handler should only be used for exceptions which push an error
code and all other exceptions must use the interrupt handler.
The system will crash if the wrong handler is used.
'no_caller_saved_registers' attribute
Use this attribute to indicate that the specified function has no caller-saved
registers. That is, all registers are callee-saved.
The compiler generates proper function entry and exit sequences to save and
restore any modified registers, except for the EFLAGS register.
If the compiler generates MPX, SSE, MMX or x87 instructions in a function with
'no_caller_saved_registers' attribute or functions called from a function with
'no_caller_saved_registers' attribute may contain MPX, SSE, MMX or x87
instructions, the compiler must save and restore the corresponding state.
The user can call functions specified with 'no_caller_saved_registers'
attribute from an interrupt handler without saving and restoring all call
clobbered registers.
On x86, interrupt handlers are only called by processors which push interrupt
data onto stack at the address where the normal return address is. Interrupt
handlers must access interrupt data via pointers so that they can update
interrupt data.
gcc/
PR target/66960
PR target/67630
PR target/67634
PR target/67841
PR target/68037
PR target/68618
PR target/68661
PR target/69575
PR target/69596
PR target/69734
* config/i386/i386-protos.h (ix86_epilogue_uses): New prototype.
* config/i386/i386.c (ix86_conditional_register_usage): Preserve
all registers, except for function return registers if there are
no caller-saved registers.
(ix86_set_func_type): New function.
(ix86_set_current_function): Call ix86_set_func_type to set
no_caller_saved_registers and func_type. Call reinit_regs if
caller-saved registers are changed. Don't allow MPX, SSE, MMX
nor x87 instructions in interrupt handler nor function with
no_caller_saved_registers attribute.
(ix86_function_ok_for_sibcall): Return false if there are no
caller-saved registers.
(type_natural_mode): Don't warn ABI change for MMX in interrupt
handler.
(ix86_function_arg_advance): Skip for callee in interrupt
handler.
(ix86_function_arg): Return special arguments in interrupt
handler.
(ix86_promote_function_mode): Promote pointer to word_mode only
for normal functions.
(ix86_can_use_return_insn_p): Don't use `ret' instruction in
interrupt handler.
(ix86_epilogue_uses): New function.
(ix86_hard_regno_scratch_ok): Likewise.
(ix86_save_reg): Preserve all registers in interrupt handler
after reload. Preserve all registers, except for function
return registers, if there are no caller-saved registers after
reload.
(find_drap_reg): Always use callee-saved register if there are
no caller-saved registers.
(ix86_minimum_incoming_stack_boundary): Return MIN_STACK_BOUNDARY
for interrupt handler.
(ix86_expand_prologue): Don't allow DRAP in interrupt handler.
Emit cld instruction if stringops are used in interrupt handler
or interrupt handler isn't a leaf function.
(ix86_expand_epilogue): Generate interrupt return for interrupt
handler and pop the 'ERROR_CODE' off the stack before interrupt
return in exception handler.
(ix86_expand_call): Disallow calling interrupt handler directly.
If there are no caller-saved registers, mark all registers that
are clobbered by the call which returns as clobbered.
(ix86_handle_no_caller_saved_registers_attribute): New function.
(ix86_handle_interrupt_attribute): Likewise.
(ix86_attribute_table): Add interrupt and no_caller_saved_registers
attributes.
(TARGET_HARD_REGNO_SCRATCH_OK): Likewise.
* config/i386/i386.h (ACCUMULATE_OUTGOING_ARGS): Use argument
accumulation in interrupt function if stack may be realigned to
avoid DRAP.
(EPILOGUE_USES): New.
(function_type): New enum.
(machine_function): Add func_type and no_caller_saved_registers.
* config/i386/i386.md (UNSPEC_INTERRUPT_RETURN): New.
(interrupt_return): New pattern.
* doc/extend.texi: Document x86 interrupt and
no_caller_saved_registers attributes.
gcc/testsuite/
PR target/66960
PR target/67630
PR target/67634
PR target/67841
PR target/68037
PR target/68618
PR target/68661
PR target/69575
PR target/69596
PR target/69734
* gcc.dg/guality/pr68037-1.c: New test.
* gcc.dg/guality/pr68037-2.c: Likewise.
* gcc.dg/guality/pr68037-3.c: Likewise.
* gcc.dg/torture/pr68037-1.c: Likewise.
* gcc.dg/torture/pr68037-2.c: Likewise.
* gcc.dg/torture/pr68037-3.c: Likewise.
* gcc.dg/torture/pr68661-1a.c: Likewise.
* gcc.dg/torture/pr68661-1b.c: Likewise.
* gcc.target/i386/interrupt-1.c: Likewise.
* gcc.target/i386/interrupt-2.c: Likewise.
* gcc.target/i386/interrupt-3.c: Likewise.
* gcc.target/i386/interrupt-4.c: Likewise.
* gcc.target/i386/interrupt-5.c: Likewise.
* gcc.target/i386/interrupt-6.c: Likewise.
* gcc.target/i386/interrupt-7.c: Likewise.
* gcc.target/i386/interrupt-8.c: Likewise.
* gcc.target/i386/interrupt-9.c: Likewise.
* gcc.target/i386/interrupt-10.c: Likewise.
* gcc.target/i386/interrupt-11.c: Likewise.
* gcc.target/i386/interrupt-12.c: Likewise.
* gcc.target/i386/interrupt-13.c: Likewise.
* gcc.target/i386/interrupt-14.c: Likewise.
* gcc.target/i386/interrupt-15.c: Likewise.
* gcc.target/i386/interrupt-16.c: Likewise.
* gcc.target/i386/interrupt-17.c: Likewise.
* gcc.target/i386/interrupt-18.c: Likewise.
* gcc.target/i386/interrupt-19.c: Likewise.
* gcc.target/i386/interrupt-20.c: Likewise.
* gcc.target/i386/interrupt-21.c: Likewise.
* gcc.target/i386/interrupt-22.c: Likewise.
* gcc.target/i386/interrupt-23.c: Likewise.
* gcc.target/i386/interrupt-24.c: Likewise.
* gcc.target/i386/interrupt-25.c: Likewise.
* gcc.target/i386/interrupt-26.c: Likewise.
* gcc.target/i386/interrupt-27.c: Likewise.
* gcc.target/i386/interrupt-28.c: Likewise.
* gcc.target/i386/interrupt-387-err-1.c: Likewise.
* gcc.target/i386/interrupt-387-err-2.c: Likewise.
* gcc.target/i386/interrupt-bnd-err-1.c: Likewise.
* gcc.target/i386/interrupt-bnd-err-2.c: Likewise.
* gcc.target/i386/interrupt-iamcu.c: Likewise.
* gcc.target/i386/interrupt-mmx-err-1.c: Likewise.
* gcc.target/i386/interrupt-mmx-err-2.c: Likewise.
* gcc.target/i386/interrupt-redzone-1.c: Likewise.
* gcc.target/i386/interrupt-redzone-2.c: Likewise.
* gcc.target/i386/interrupt-sibcall-1.c: Likewise.
* gcc.target/i386/interrupt-sibcall-2.c: Likewise.
* gcc.target/i386/interrupt-switch-abi.c: Likewise.
