https://gcc.gnu.org/g:94d01a884702934bc03ccedff62e2c65515c8c83
commit r15-7637-g94d01a884702934bc03ccedff62e2c65515c8c83
Author: Richard Biener <rguent...@suse.de>
Date: Wed Feb 12 11:20:10 2025 +0100
tree-optimization/86270 - improve SSA coalescing for loop exit test
The PR indicates a very specific issue with regard to SSA coalescing
failures because there's a pre IV increment loop exit test. While
IVOPTs created the desired IL we later simplify the exit test into
the undesirable form again. The following fixes this up during RTL
expansion where we try to improve coalescing of IVs. That seems
easier that trying to avoid the simplification with some weird
heuristics (it could also have been written this way).
PR tree-optimization/86270
* tree-outof-ssa.cc (insert_backedge_copies): Pattern
match a single conflict in a loop condition and adjust
that avoiding the conflict if possible.
* gcc.target/i386/pr86270.c: Adjust to check for no reg-reg
copies as well.
Diff:
---
gcc/testsuite/gcc.target/i386/pr86270.c | 3 ++
gcc/tree-outof-ssa.cc | 61 ++++++++++++++++++++++++++++++---
2 files changed, 59 insertions(+), 5 deletions(-)
diff --git a/gcc/testsuite/gcc.target/i386/pr86270.c
b/gcc/testsuite/gcc.target/i386/pr86270.c
index 68562446fa4e..89b9aeb317a6 100644
--- a/gcc/testsuite/gcc.target/i386/pr86270.c
+++ b/gcc/testsuite/gcc.target/i386/pr86270.c
@@ -13,3 +13,6 @@ test ()
/* Check we do not split the backedge but keep nice loop form. */
/* { dg-final { scan-assembler-times "L\[0-9\]+:" 2 } } */
+/* Check we do not end up with reg-reg moves from a pre-increment IV
+ exit test. */
+/* { dg-final { scan-assembler-not "mov\[lq\]\?\t%\?\[er\].x, %\?\[er\].x" } }
*/
diff --git a/gcc/tree-outof-ssa.cc b/gcc/tree-outof-ssa.cc
index d340d4ba5292..c2fe39874fbc 100644
--- a/gcc/tree-outof-ssa.cc
+++ b/gcc/tree-outof-ssa.cc
@@ -46,6 +46,7 @@ along with GCC; see the file COPYING3. If not see
#include "tree-outof-ssa.h"
#include "dojump.h"
#include "internal-fn.h"
+#include "gimple-fold.h"
/* FIXME: A lot of code here deals with expanding to RTL. All that code
should be in cfgexpand.cc. */
@@ -1259,10 +1260,10 @@ insert_backedge_copies (void)
if (gimple_nop_p (def)
|| gimple_code (def) == GIMPLE_PHI)
continue;
- tree name = copy_ssa_name (result);
- gimple *stmt = gimple_build_assign (name, result);
imm_use_iterator imm_iter;
gimple *use_stmt;
+ auto_vec<use_operand_p, 8> uses;
+ int idx = -1;
/* The following matches trivially_conflicts_p. */
FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, result)
{
@@ -1273,11 +1274,61 @@ insert_backedge_copies (void)
{
use_operand_p use;
FOR_EACH_IMM_USE_ON_STMT (use, imm_iter)
- SET_USE (use, name);
+ {
+ uses.safe_push (use);
+ if (!is_gimple_debug (use_stmt))
+ {
+ if (idx == -1)
+ idx = uses.length () - 1;
+ else
+ idx = -2;
+ }
+ }
}
}
- gimple_stmt_iterator gsi = gsi_for_stmt (def);
- gsi_insert_before (&gsi, stmt, GSI_SAME_STMT);
+ /* When there is just a conflicting statement try to
+ adjust that to refer to the new definition.
+ In particular for now handle a conflict with the
+ use in a (exit) condition with a NE compare,
+ replacing a pre-IV-increment compare with a
+ post-IV-increment one. */
+ if (idx >= 0
+ && is_a <gcond *> (USE_STMT (uses[idx]))
+ && (gimple_cond_code (USE_STMT (uses[idx])) == NE_EXPR
+ || gimple_cond_code (USE_STMT (uses[idx])) == EQ_EXPR)
+ && is_gimple_assign (def)
+ && gimple_assign_rhs1 (def) == result
+ && (gimple_assign_rhs_code (def) == PLUS_EXPR
+ || gimple_assign_rhs_code (def) == MINUS_EXPR
+ || gimple_assign_rhs_code (def) == POINTER_PLUS_EXPR)
+ && TREE_CODE (gimple_assign_rhs2 (def)) == INTEGER_CST)
+ {
+ gcond *cond = as_a <gcond *> (USE_STMT (uses[idx]));
+ tree *adj;
+ if (gimple_cond_lhs (cond) == result)
+ adj = gimple_cond_rhs_ptr (cond);
+ else
+ adj = gimple_cond_lhs_ptr (cond);
+ gimple_stmt_iterator gsi = gsi_for_stmt (cond);
+ tree newval
+ = gimple_build (&gsi, true, GSI_SAME_STMT,
+ UNKNOWN_LOCATION,
+ gimple_assign_rhs_code (def),
+ TREE_TYPE (*adj),
+ *adj, gimple_assign_rhs2 (def));
+ *adj = newval;
+ SET_USE (uses[idx], arg);
+ update_stmt (cond);
+ }
+ else
+ {
+ tree name = copy_ssa_name (result);
+ gimple *stmt = gimple_build_assign (name, result);
+ gimple_stmt_iterator gsi = gsi_for_stmt (def);
+ gsi_insert_before (&gsi, stmt, GSI_SAME_STMT);
+ for (auto use : uses)
+ SET_USE (use, name);
+ }
}
}
}
