https://gcc.gnu.org/g:2759b96d463e0bc7f66c2ac7a9c90f0a0a4873ff
commit 2759b96d463e0bc7f66c2ac7a9c90f0a0a4873ff
Author: Michael Meissner <meiss...@linux.ibm.com>
Date: Sun Nov 17 20:20:26 2024 -0500
PR target/108958 -- use mtvsrdd to zero extend GPR DImode to VSX TImode
Previously GCC would zero externd a DImode GPR value to TImode by first zero
extending the DImode value into a GPR TImode value, and then do a MTVSRDD to
move this value to a VSX register.
This patch does the move directly, since if the middle argument to MTVSRDD
is 0,
it does the zero extend.
This patch also generates LXVRDX if the DImode value is in memory.
Finally, it the DImode is already in a vector register, it does a XXSPLTIB
and
XXPERMDI to get the value into the bottom 64-bits of the register.
I have built GCC with the patches in this patch set applied on both little
and
big endian PowerPC systems and there were no regressions. Can I apply this
patch to GCC 15?
2024-11-17 Michael Meissner <meiss...@linux.ibm.com>
gcc/
PR target/108598
* gcc/config/rs6000/rs6000.md (zero_extendditi2): New insn.
gcc/testsuite/
PR target/108598
* gcc.target/powerpc/pr108958.c: New test.
Diff:
---
gcc/config/rs6000/rs6000.md | 26 ++++++++++++++++
gcc/testsuite/gcc.target/powerpc/pr108958.c | 47 +++++++++++++++++++++++++++++
2 files changed, 73 insertions(+)
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index d266f93ff2e4..e4c52f937d33 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -1026,6 +1026,32 @@
(set_attr "dot" "yes")
(set_attr "length" "4,8")])
+(define_insn_and_split "zero_extendditi2"
+ [(set (match_operand:TI 0 "gpc_reg_operand" "=r,r,wa,wa")
+ (zero_extend:TI
+ (match_operand:DI 1 "reg_or_mem_operand" "r,m,r,Z")))]
+ "TARGET_DIRECT_MOVE_64BIT"
+ "@
+ #
+ #
+ mtvsrdd %x0,0,%1
+ lxvrdx %x0,%y1"
+ "&& reload_completed && int_reg_operand (operands[0], TImode)"
+ [(set (match_dup 2)
+ (match_dup 1))
+ (set (match_dup 3)
+ (const_int 0))]
+{
+ int lo = BYTES_BIG_ENDIAN ? 1 : 0;
+ int hi = 1 - lo;
+ int r = reg_or_subregno (operands[0]);
+
+ operands[2] = gen_rtx_REG (DImode, r + lo);
+ operands[3] = gen_rtx_REG (DImode, r + hi);
+}
+ [(set_attr "type" "*,load,mtvsr,vecload")
+ (set_attr "length" "8,8,*,*")
+ (set_attr "isa" "*,*,*,p10")])
(define_insn "extendqi<mode>2"
[(set (match_operand:EXTQI 0 "gpc_reg_operand" "=r,?*v")
diff --git a/gcc/testsuite/gcc.target/powerpc/pr108958.c
b/gcc/testsuite/gcc.target/powerpc/pr108958.c
new file mode 100644
index 000000000000..aa79dc880c8e
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/pr108958.c
@@ -0,0 +1,47 @@
+/* { dg-do compile } */
+/* { dg-require-effective-target int128 } */
+/* { dg-require-effective-target lp64 } */
+/* { dg-require-effective-target power10_ok } */
+/* { dg-options "-mdejagnu-cpu=power10 -O2" } */
+
+/* PR target/108958, use mtvsrdd to zero extend gpr to vsx register. */
+
+void
+arg_to_vsx (unsigned long long x, __uint128_t *p)
+{
+ /* mtvsrdd vsx,0,gpr. */
+ __uint128_t y = x;
+ __asm__ (" # %x0" : "+wa" (y));
+ *p = y;
+}
+
+void
+mem_to_vsx (unsigned long long *p, __uint128_t *q)
+{
+ /* lxrdx vsx,0,ptr. */
+ __uint128_t y = *p;
+ __asm__ (" # %x0" : "+wa" (y));
+ *q = y;
+}
+
+
+void
+arg_to_gpr (unsigned long long x, __uint128_t *p)
+{
+ /* mr gpr1_lo,gpr2; li gpr1_hi,0. */
+ __uint128_t y = x;
+ __asm__ (" # %0" : "+r" (y));
+ *p = y;
+}
+
+void
+mem_to_gpr (unsigned long long *p, __uint128_t *q)
+{
+ /* ld gpr1_lo,addr; li gpr1_hi,0. */
+ __uint128_t y = *p;
+ __asm__ (" # %0" : "+r" (y));
+ *q = y;
+}
+
+/* { dg-final { scan-assembler-times {\mmtvsrdd .*,0,.*\M} 1 } } */
+/* { dg-final { scan-assembler-times {\mlxvrdx\M} 1 } } */
