Bonjour,
Je viens vers vous pour tenter de ressusciter un ASR 9001
C’est un vielle ASR qui a un soucis quand on le turboboot vers une version
récente il mets les MPA en erreur même avec un service pack installé dessus
J’arrive uniquement à le faire fonctionner en 5.1.3 turboboot installe du FPD
et ensuite downgrade des fpga et romon
Dès que je tente d’upgrade même si je respecte l’upgrade path je perds les deux
MPA 4x10 qui passent en failed puis disabled
J’ai essayé de turboboot pas mal de version ça change rien et si je passe de
5.1.3 à 5.2.2 j’ai les MPA qui lachent
Je vous laisses quelques logs
J’ai pensé aux bridges SMUs mais pareil ça donne rien il me dit que j’en ai pas
besoin ^^
Avez-vous déjà eu ce soucis ?
Merci d’avance
RP/0/RSP0/CPU0:ios#show platform
Sun Jan 1 12:01:12.175 UTC
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 ASR9001-RP(Active) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 ASR9001-LC IOS XR RUN PWR,NSHUT,MON
0/0/0 A9K-MPA-4X10GE DISABLED NPWR,NSHUT,MON
0/0/1 A9K-MPA-4X10GE DISABLED NPWR,NSHUT,MON
RP/0/RSP0/CPU0:ios#dir /eLC/0/0/CPU0:Sep 19 09:52:25.521 : lda_server[65]:
%PLATFORM-LDA-3-INIT_FAIL : Failed to initialize Linecard interface sub system
(0x4642a800 - 'Subsystem(3205)' detected the 'warning' condition 'Code(20)') :
pkg/bin/lda_server : (PID=40990) : -Traceback= 4c63a800 40001060 4b1f92cc
4b29761c 4b295550 40000840 4000471c
LC/0/0/CPU0:Sep 19 09:52:25.546 : sysmgr[91]: %OS-SYSMGR-3-ERROR :
lda_server(1) (jid 65) exited, will be respawned with a delay (slow-restart)
LC/0/0/CPU0:Sep 19 09:52:25.548 : sysmgr[91]: %OS-SYSMGR-3-ERROR :
lda_server(65) (fail count 1) will be respawned in 10 seconds
LC/0/0/CPU0:Sep 19 09:52:26.105 : fpd_fpga_agent[192]: %PLATFORM-LDA-4-WARNING
: Failed to get firmware revision (0x00000016 - Invalid argument) :
pkg/bin/fpd_fpga_agent : (PID=147541) : -Traceback= 4c63a2bc 40000538 400016a4
LC/0/0/CPU0:Sep 19 09:52:26.127 : fpd_fpga_agent[192]: %PLATFORM-LDA-4-WARNING
: Failed to get firmware revision (0x00000016 - Invalid argument) :
pkg/bin/fpd_fpga_agent : (PID=147541) : -Traceback= 4c63a2bc 40000538 400016a4
LC/0/0/CPU0:Sep 19 09:52:30.560 : sysmgr[91]: %OS-SYSMGR-3-ERROR : zllc(1) (jid
371) exited, will be respawned with a delay (slow-restart)
LC/0/0/CPU0:Sep 19 09:52:30.561 : sysmgr[91]: %OS-SYSMGR-3-ERROR : zllc(371)
(fail count 1) will be respawned in 10 seconds
LC/0/0/CPU0:Sep 19 09:52:32.150 : fpd_fpga_agent[192]:
%PLATFORM-UPGRADE_FPD-4-UP_REV : fpga4 instance 0 is severely up-rev
(V255.255), downgrade to (V2.10). Use the "upgrade hw-module fpd" CLI in admin
mode.
LC/0/0/CPU0:Sep 19 09:52:35.126 : fpd_fpga_agent[192]:
%PLATFORM-UPGRADE_FPD-4-UP_REV : fpga2 instance 0 is severely up-rev
(V255.255), downgrade to (V1.18). Use the "upgrade hw-module fpd" CLI in admin
mode.
LC/0/0/CPU0:Sep 19 09:52:41.701 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_1_FAIL_0 : Set|fialc[139328]|0x103b001|Data NB
Serdes Link 1 Failure on FIA 1
LC/0/0/CPU0:Sep 19 09:52:41.704 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_0_FAIL_0 : Set|fialc[139328]|0x103b001|Data NB
Serdes Link 0 Failure on FIA 1
LC/0/0/CPU0:Sep 19 09:52:41.705 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_1_FAIL_0 : Set|fialc[139328]|0x103b000|Data NB
Serdes Link 1 Failure on FIA 0
LC/0/0/CPU0:Sep 19 09:52:41.705 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_0_FAIL_0 : Set|fialc[139328]|0x103b000|Data NB
Serdes Link 0 Failure on FIA 0
RP/0/RSP0/CPU0:ios(admin)#upgrade hw-module fpd all force location
allLC/0/0/CPU0:Sep 19 04:24:14.331 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_SB_SERDES_1_FAIL_0 : Set|fialc[139328]|0x103b001|Data SB
Serdes Link 1 Failure on FIA 1
LC/0/0/CPU0:Sep 19 04:24:14.331 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_SB_SERDES_0_FAIL_0 : Set|fialc[139328]|0x103b001|Data SB
Serdes Link 0 Failure on FIA 1
LC/0/0/CPU0:Sep 19 04:24:14.331 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_SB_SERDES_1_FAIL_0 : Set|fialc[139328]|0x103b000|Data SB
Serdes Link 1 Failure on FIA 0
LC/0/0/CPU0:Sep 19 04:24:14.331 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_SB_SERDES_0_FAIL_0 : Set|fialc[139328]|0x103b000|Data SB
Serdes Link 0 Failure on FIA 0
LC/0/0/CPU0:Sep 19 04:24:22.430 : dumper[56]: %OS-DUMPER-4-SIGSEGV : Thread 1
received SIGSEGV - Segmentation Fault
LC/0/0/CPU0:Sep 19 04:24:22.430 : dumper[56]: %OS-DUMPER-4-SIGSEGV_INFO :
Accessed BadAddr 0x1 at PC 0x400025ac. Signal code 1 - SEGV_MAPPER. Address not
mapped.
LC/0/0/CPU0:Sep 19 04:24:22.430 : dumper[56]: %OS-DUMPER-4-CRASH_INFO : Crashed
pid = 139340 (pkg/bin/fab_xbar)
LC/0/0/CPU0:Sep 19 04:24:39.151 : pifibm_server_lc[291]:
%OS-PLATFORM_LPTS_PIFIB-4-ERR_INVALID_POLICER_RATE_BURST : Policer Burst 7d0 is
more than Policer Rate 3e8: Re-setting the Burst to PolicerRate
LC/0/0/CPU0:Sep 19 04:24:57.181 : sysmgr[91]: %OS-SYSMGR-3-ERROR : fab_xbar(1)
(jid 176) exited, will be respawned with a delay (slow-restart)
LC/0/0/CPU0:Sep 19 04:24:57.182 : sysmgr[91]: %OS-SYSMGR-3-ERROR :
fab_xbar(176) (fail count 1) will be respawned in 10 seconds
LC/0/0/CPU0:Sep 19 04:25:16.458 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_1_FAIL_0 : Clear|fialc[139328]|0x103b001|Data NB
Serdes Link 1 Failure on FIA 1
LC/0/0/CPU0:Sep 19 04:25:16.459 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_0_FAIL_0 : Clear|fialc[139328]|0x103b001|Data NB
Serdes Link 0 Failure on FIA 1
LC/0/0/CPU0:Sep 19 04:25:16.459 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_1_FAIL_0 : Clear|fialc[139328]|0x103b000|Data NB
Serdes Link 1 Failure on FIA 0
LC/0/0/CPU0:Sep 19 04:25:16.461 : pfm_node_lc[290]:
%FABRIC-FIA-1-DATA_NB_SERDES_0_FAIL_0 : Clear|fialc[139328]|0x103b000|Data NB
Serdes Link 0 Failure on FIA 0
Fri Sep 19 04:25:37.922 UTC
***** UPGRADE WARNING MESSAGE: *****
* This upgrade operation has a maximum timout of 160 minutes. *
* If you are executing the cmd for one specific location and *
* card in that location reloads or goes down for some reason *
* you can press CTRL-C to get back the RP's prompt. *
* If you are executing the cmd for _all_ locations and a node *
* reloads or is down please allow other nodes to finish the *
* upgrade process before pressing CTRL-C. *
% RELOAD REMINDER:
- The upgrade operation of the target module will not interrupt its normal
operation. However, for the changes to take effect, the target module
will need to be manually reloaded after the upgrade operation. This can
be accomplished with the use of "hw-module <target> reload" command.
- If automatic reload operation is desired after the upgrade, please use
the "reload" option at the end of the upgrade command.
- The output of "show hw-module fpd location" command will not display
correct version information after the upgrade if the target module is
not reloaded.
NOTE: Chassis CLI will not be accessible while upgrade is in progress.
Continue? [confirm]
This can take some time for a full chassis.
Ensure that system is not power cycled during the upgrades.
Please consult the documentation for more information.
Continue ? [no]: yes
FPD upgrade in progress on some hardware, reload/configuration change
on those is not recommended as it might cause HW programming failure
and result in RMA of the hardware.
Starting the upgrade/download of following FPDs:
=========== ==== ======= ======= =========== =========
Current Upg/Dng
Location Type Subtype Upg/Dng Version Version
=========== ==== ======= ======= =========== =========
0/RSP0/CPU0 lc fpga2 upg 1.15 1.15
0/RSP0/CPU0 lc cbc upg 22.114 22.114
0/RSP0/CPU0 lc rommon dng 2.04 2.03
0/FT0/SP ft cbc upg 24.115 24.115
------------------------------------------------------
Starting the upgrade/download of following FPDs:
=========== ==== ======= ======= =========== =========
Current Upg/Dng
Location Type Subtype Upg/Dng Version Version
=========== ==== ======= ======= =========== =========
0/0/CPU0 lc cbc upg 23.114 23.114
0/0/CPU0 lc fpga2 dng 255.255 1.18
0/0/CPU0 lc fpga4 dng 255.255 2.10
0/0/CPU0 lc rommon dng 2.04 2.03
------------------------------------------------------
FPD upgrade in progress. Max timeout remaining 89 min.
FPD upgrade in progress. Max timeout remaining 88 min.
FPD upgrade in progress. Max timeout remaining 87 min.
FPD upgrade in progress. Max timeout remaining 86 min.
FPD upgrade in progress. Max timeout remaining 85 min.
FPD upgrade in progress. Max timeout remaining 84 min.
FPD upgrade in progress. Max timeout remaining 83 min.
FPD upgrade in progress. Max timeout remaining 82 min.
FPD upgrade in progress. Max timeout remaining 81 min.
LC/0/0/CPU0:Sep 19 04:34:40.569 : pfm_node_lc[290]:
%PLATFORM-DIAGS-0-LC_NP_LOOPBACK_FAILED_TX_PATH :
Set|online_diag_lc[139345]|Line card NPU loopback Test(0x2000006)|link failure
mask is 0x3.
FPD upgrade in progress. Max timeout remaining 80 min.
FPD upgrade in progress. Max timeout remaining 79 min.
Successfully upgraded cbc for ASR9001-LC on location
0/0/CPU0 from 23.114 to 23.114
Successfully downgraded fpga2 for ASR9001-LC on location
0/0/CPU0 from 255.255 to 1.18
Successfully downgraded fpga4 for ASR9001-LC on location
0/0/CPU0 from 255.255 to 2.10
Successfully downgraded rommon for ASR9001-LC on location
0/0/CPU0 from 2.04 to 2.03
FPD upgrade in progress. Max timeout remaining 78 min.
---------------------------
Liste de diffusion du FRnOG
http://www.frnog.org/
