Hi.
I've got a dvb-t card, a hauppauge nova-t 500, which is the one with
two tuners and no hardware encoder/decoder.
Well, I've read that it needs some work to make it work, but I still
haven't managed. So here's what I've done. BTW, this is a debian
stable box.
I have these firmwares:
-rw-r--r-- 1 root root 9180 2005-05-01 23:26 dvb-dibusb-5.0.0.11.fw
-rw-r--r-- 1 root root 30555 2009-02-02 13:05 dvb-fe-tda10045.fw
-rw-r--r-- 1 root root 24478 2009-02-02 13:06 dvb-fe-tda10046.fw
-rw-r--r-- 1 root root 34306 2007-09-10 11:09 dvb-usb-dib0700-1.10.fw
and I've put them in /usr/lib/hotplug/firmware and in /lib/firmware.
If the right place is another one, I don't know.
I also have these modules:
tinglao:~# lsmod (snipped)
saa7146 19848 2 budget_ci,budget_core
dvb_usb_dib0700 12936 0
dib7000m 15620 1 dvb_usb_dib0700
dib7000p 13828 1 dvb_usb_dib0700
dvb_usb 21388 1 dvb_usb_dib0700
dvb_pll 15236 1 dvb_usb
dib3000mc 13188 1 dvb_usb_dib0700
mt2060 6276 1 dvb_usb_dib0700
dvb_core 79656 4 dvb_usb,budget_ci,budget_core,stv0299
firmware_class 10752 4 dvb_usb,budget_ci,tda1004x,pcmcia
i2c_core 25728 23
dib7000m,dib7000p,dvb_usb,dvb_pll,dib3000mc,dibx000_common,mt2060,it87,via686a,i2c_isa,lm87,tveeprom,budget_ci,lnbp21,budget_core,ttpci_eeprom,tda1004x,stv0297,stv0299,radeonfb,fb_ddc,i2c_algo_bit,i2c_piix4
usbcore 131336 6
dvb_usb_dib0700,dvb_usb,uhci_hcd,ehci_hcd,ohci_hcd
hwinfo knows that I have a card:
59: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_02_09_0_if0
Unique ID: 2XnU.m9RqXITNupD
Parent ID: t2XO.ZszXABOwfd6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:09.0/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.22.1-reiser uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.22.1-reiser uhci_hcd"
Device: "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:02:09.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (USB Controller)
The card is pci, but I've read somewhere that it uses some kind of
pci-usb connection.
And dmesg only shows this:
saa7146: register extension 'budget_ci dvb'.
Linux video capture interface: v2.00
I've added this rule for udev:
KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c"
And the script is:
#!/bin/sh
/bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\
2\3,'
This was from the kerne's documentation.
And that's all. The only thing I haven't done is installing hotplug.
but in debian, udev+hal+usbmount and hotplug conflict, so unless I
know it will work, I won't change.
Well, many people here have this working. So what am I missing?
Thanks
Alberto
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
