Hi,
Not really a freevo trouble, but as I can find here some expert users of
a Hauppauge PVR card :-)
I use the PVR 350 TV Out to watch freevo on my (plain old CRT) TV. This
worked very good since the setup of this system, 4 months ago.
Since one month or so, sometime, when starting a Video, the TV screnn
goes completely out of sync.
Only way to get a stable TV out again : rmmod ivtvfb, rommod ivtv,
modprobe ivtv, modprobe ivtvfb
Not very practical (not to speak about the WAF :-( )
I thank about a change in xorg.conf, but no.
Here are the relevant parts of xorg.conf, if useful :
-----------------------------
Section "Monitor"
Identifier "PAL Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x576"
DotClock 42.6
HTimings 720 760 832 944
VTimings 576 577 580 602
EndMode
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtv"
BusID "PCI:2:13:0"
Option "VideoOverlay" "on"
Option "fbdev" "/dev/fb1"
Option "XVideo" "1"
EndSection
Section "Screen"
Identifier "TV"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "PAL Monitor"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "720x576"
FbBpp 32
EndSubsection
DefaultFbbpp 32
EndSection
Section "ServerLayout"
Identifier "TVlayout"
Screen "TV"
Option "AllowEmptyInput"
EndSection
--------------------------------------------
Any ideas ?
Thanks,
Pascal
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
