This is what I have in the local_conf.py file:
VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
':audiorate=32000' + # 44100 for better sound
':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
'buffersize=64') # 64MB capture buffer, change?
# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
#
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
TV_VIEW_SIZE = (640, 480)
TV_REC_SIZE = (320, 240) # Default for slower computers
# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11
TV_REC_OUTFMT = 'yuy2'
# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
#VCR_CMD = ('/root/bin/record.sh %(channel)s %(seconds)s "%(filename)s"')
VCR_CMD = (CONF.mencoder + ' ' +
'tv:// ' + # New mplayer requires this.
'-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) +
':norm=%s' % CONF.tv +
':channel=%(channel)s' + # Filled in by Freevo
':chanlist=%s' % CONF.chanlist +
':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
':outfmt=%s' % TV_REC_OUTFMT +
':device=%s' % TV_DEVICE +
VCR_AUDIO + # set above
' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec
'vcodec=mpeg4' + # lavcodec mpeg-4
':vbitrate=1200:' + # Change lower/higher, bitrate
'keyint=30 ' + # Keyframe every 10 secs, change?
'-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must
be enabled in mencoder!
'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s
'-ffourcc divx ' + # Force 'divx' ident, better compat.
'-endpos %(seconds)s ' + # only mencoder uses this so do it
here.
'-o %(filename)s') # Filled in by Freevo
And this is what's in the main log file:
================================================================================
Freevo 1.8.1 r10783 started at Thu Jan 15 12:36:03 2009
--------------------------------------------------------------------------------
2009-01-15 12:36:03,406 INFO config.py (534): LOGDIR: /var/log
/home/freevo/log
2009-01-15 12:36:03,407 INFO config.py (535): STATICDIR: /var/lib
/home/freevo/static
2009-01-15 12:36:03,408 INFO config.py (536): CACHEDIR: /var/cache
/home/freevo/cache
2009-01-15 12:36:03,410 INFO config.py (555): Loading freevo configuration
file "/etc/freevo/freevo.conf"
2009-01-15 12:36:03,415 INFO config.py (591): Loading debconf configuration
file "/etc/freevo/debconf.py"
2009-01-15 12:36:03,642 INFO config.py (646): Loading debconf configuration
file "/etc/freevo/debconf.py"
2009-01-15 12:36:03,646 INFO config.py (656): Loading local configuration
file "/home/mfrei/.freevo/local_conf.py"
Warning: freevo_config.py was changed, please check local_conf.py
You are using version 5.26, changes since then:
The changelist has not been updated, please notify the developers!
Error: VIDEO_SHOW_DATA_DIR not found
ROM_DRIVES: Auto-detected and added "('/media/cdrom0', '/dev/scd0', 'CD-1')"
2009-01-15 12:36:03,707 INFO config.py (1054): overlaydir:
/home/freevo/cache/vfs
2009-01-15 12:36:12,890 INFO rom_drives.py (342): Getting capabilities for
CD-1 (/dev/scd0)
2009-01-15 12:36:12,894 INFO rom_drives.py (356): CD-1 can close
2009-01-15 12:36:12,895 INFO rom_drives.py (360): CD-1 can open
2009-01-15 12:36:12,896 INFO rom_drives.py (364): CD-1 can select speed
init MpdBaseScreen
Plugin Interface items
MpdMainMenu init
Freevo 1.8.1 ready
2009-01-15 12:36:18,326 INFO create thread notifier pipe
2009-01-15 12:36:22,434 INFO record_client.py (98): ('localhost', 18001) is
up
2009-01-15 12:36:25,799 INFO epg_xmltv.py (110): XMLTV, got cached guide
(version 6).
2009-01-15 12:39:21,062 INFO No Type found by Extension. Trying all
2009-01-15 12:39:21,182 INFO Invalid header
2009-01-15 12:39:21,286 INFO trying mpeg-pes scan
Stopping webserver plugin.
Stopping webserver plugin.
Stopping webserver plugin.
--------------------------------------------------------------------------------
Freevo 1.8.1 r10783 finished at Thu Jan 15 12:36:03 2009
================================================================================
And this is the recording log:
================================================================================
Freevo 1.8.1 r10783 started at Thu Jan 15 12:06:52 2009
--------------------------------------------------------------------------------
2009-01-15 12:06:53,056 INFO config.py (534): LOGDIR: /var/log
/home/freevo/log
2009-01-15 12:06:53,059 INFO config.py (535): STATICDIR: /var/lib
/home/freevo/static
2009-01-15 12:06:53,060 INFO config.py (536): CACHEDIR: /var/cache
/home/freevo/cache
2009-01-15 12:06:53,061 INFO config.py (555): Loading freevo configuration
file "/etc/freevo/freevo.conf"
2009-01-15 12:06:53,065 INFO config.py (591): Loading debconf configuration
file "/etc/freevo/debconf.py"
2009-01-15 12:06:54,618 INFO new process watcher instance
2009-01-15 12:07:02,231 INFO config.py (646): Loading debconf configuration
file "/etc/freevo/debconf.py"
2009-01-15 12:07:02,233 INFO config.py (656): Loading local configuration
file "/etc/freevo/local_conf.py"
Warning: freevo_config.py was changed, please check local_conf.py
You are using version 5.23, changes since then:
Version 5.24:
Added POLL_TIME to allow custom poll rates to be set, default 0.01 seconds
2009-01-15 12:07:02,482 INFO config.py (1054): overlaydir:
/home/freevo/cache/vfs
2009-01-15 12:07:23,645 INFO recordserver.py (109): PLUGIN_RECORD: 28
2009-01-15 12:07:23,868 INFO generic_record.py (65): ACTIVATING GENERIC
RECORD PLUGIN
2009-01-15 12:07:23,897 WARNING record_types.py (198): [Errno 2] No such file
or directory: '/home/freevo/static/favorites.pickle'
2009-01-15 12:07:53,006 INFO recordserver.py (271): Got ScheduledRecordings
(version 3).
2009-01-15 12:07:53,019 INFO create thread notifier pipe
2009-01-15 12:36:41,092 INFO recordserver.py (183): Overlap:
Thu Jan 01 01:00->04:14 (01:00)* C1.sfdrs.ch This channel has no data loaded
Thu Jan 15 12:30->13:30 (12:30)* C3.br-online.de Planet Wissen
2009-01-15 12:36:41,110 INFO recordserver.py (913):
overlap_duration=915464647
2009-01-15 12:36:41,113 INFO recordserver.py (927): CALLED RECORD STOP 1:
Thu Jan 01 01:00->04:14 (01:00)* C1.sfdrs.ch This channel has no data loaded
2009-01-15 12:36:41,114 WARNING recordserver.py (945): delaying: Thu Jan 15
12:30->13:30 (12:30)* C3.br-online.de Planet Wissen
2009-01-15 12:36:45,002 INFO recordserver.py (947): going to record: Thu
Jan 15 12:30->13:30 (12:30)* C3.br-online.de Planet Wissen
2009-01-15 12:36:45,004 INFO recordserver.py (965): start recording: Thu
Jan 15 12:30->13:30 (12:30) C3.br-online.de Planet Wissen
2009-01-15 12:36:45,006 WARNING channels.py (181): Unable to get channel list
for europe-west.
2009-01-15 12:36:45,523 INFO recordserver.py (1332): RECORD_START Thu Jan
15 12:30->13:30 (12:30) C3.br-online.de Planet Wissen
2009-01-15 12:36:46,072 INFO recordserver.py (1340): RECORD_STOP Thu Jan 15
12:30->13:30 (12:30) C3.br-online.de Planet Wissen
2009-01-15 12:36:48,347 WARNING videothumb.py (115): no imagefile found for
"/home/freevo/recordings/01-15_12_30_Planet_Wissen.avi"
-------- Original-Nachricht --------
> Datum: Thu, 15 Jan 2009 09:58:48 +0000
> Von: John Molohan <[email protected]>
> An: [email protected]
> CC: [email protected]
> Betreff: Re: [Freevo-users] Recording not starting and problem with channel
> management
> markus frei wrote:
> > I have at least 2 issues with freevo 1.8.1 (installed in mint 6 from
> repositories and using tvtime with a pinnaclesys tv pro card):
> >
> > 1). Tvtime itself works great, and I'm using frequencies to tune the
> channels, as that gives me better quality and I don't have to finetune. When
> freevo adds it's info to the tvtime stationlist.xml file, it also adds "US
> Cable" to the band identifier. This makes it impossible to actually tune in
> to the channel. When I then edit the stationlist.xml file and change "US
> Cable" to "Custom", then restart freevo, it works. The problem seems to be
> that after a PC restart freevo again puts the "US Cable" into the file. Does
> anyone know where I can change that behavior?
> >
> It's a bug. I patched it a long time ago when I was using tvtime but
> never submitted it and now it's long gone (I'm using ivtv). It wasn't
> difficult to patch so if you have the time and can submit a patch that
> would be great. From what I remember I changed it so that when using
> frequencies I had Custom set as the country in freevo.conf then patched
> tvtime.py so that it in turn set Custom in it's xml file instead of US
> Cable when it saw that. I could be wrong though it was around 3 years ago.
> > 2). I can't get any recording from TV to start. I do get a file with
> the scheduled recording info, but no recording itself. I tried the
> instructions on the following Link where there is a bash script that is run
> to start
> mencoder, http://freevo.sr-club.de/ and I also tried the freevo builtin
> things by just uncommenting the mencoder parts in my local_conf.py file (the
> user's file) and no recording started. If I do everything from the terminal
> it works, but as I'm not a scripter I don't know how to get the correct
> info from freevo to go into the bash script. Can someone help me here?
> >
> > Thanks.
> >
> We'll need some more info - the relevant settings from your config and
> excerpts from main.log and recordserver.log.
>
> John
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
--
Sensationsangebot verlängert: GMX FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K1308T4569a
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
