Hello I'd like to install OpenZAP so I can use a TDM card with Freeswitch, but I'm getting a software error althought the TDM card seems detected (lspci -v OK). Dahdi was successfully compiled from source code.
Is it OK to just install Dahdi 2.2.0 without Asterisk before going ahead with OpenZAP? The reason I ask, is that in another forum, someone mentionned "/etc/asterisk/chan_dahdi.conf". Here's the output from dahdi_cfg -vvv: DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0.2 Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) 1 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) Here's ls -l /dev/dahdi/: total 0 crw-rw---- 1 root root 196, 254 Dec 8 13:38 channel crw-rw---- 1 root root 196, 0 Dec 8 13:38 ctl crw-rw---- 1 root root 196, 255 Dec 8 13:38 pseudo crw-rw---- 1 root root 196, 253 Dec 8 13:38 timer Has someone succesfully installed Dahdi without Asterisk? Thank you. -- View this message in context: http://old.nabble.com/-OpenZAP--Does-Dahdi-%28ex-Zaptel%29-require-Asterisk--tp26694069p26694069.html Sent from the Freeswitch-users mailing list archive at Nabble.com. _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
