Yehavi, There are a few variations of transmitting this information... If you have already enabled a supplemental isdn service profile, try adding the following to the PRI you are using:
(config-if)#isdn outgoing ie facility (config-if)#iisdn outgoing ie extended-facility (config-if)#isdn outgoing display-ie (config-if)#isdn outgoing ie caller-number (config-if)#isdn outgoing ie called-number -metik Yehavi Bourvine wrote: > Hello, > > We have a Cisco running IOS 12.4T used as our SIP-PRI gateway. On > the PRI there is a Nortel with Q.Sig. After a lot of configuration > trials I've managed to set it to send back the connected name over the > SIP (i.e. when a call goes from SIP to PRI, the PRI sends back the > connected name and then the Cisco adds it as a Remote-Party-ID). > However, I did not save it and a power outage cleared this config. In > my age I don't remember what I've done... > > Anyone knows the correct config? > > Thanks! __Yehavi: > ------------------------------------------------------------------------ > > _______________________________________________ > FreeSWITCH-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
