Bear in mind that FS will accept both 2833 and INFO in any profile on an inbound call. Param "dtmf-type" is valid only for outbound calls from the profile.
Ognjen On Thu, Dec 3, 2009 at 6:11 AM, Yehavi Bourvine <[email protected]>wrote: > Hello, > > I have Polycom phones which send only RFC-2833 (or inband which I > dislike) and they should go out to the PSTN via a Cisco gateway. The Cisco > gateway has some bug and accepts only INFO. > > I did a few tests: > > - Some of the phones are on different profile than the Cisco. On their > profile I set 'dtmf-type=rfc2833' and on the Cisco's profile I set > 'dtmf-type=info' and Freeswitch did the translation. All works ok... > - Some of the phones are on the same profile as the Cisco, so I must > set dtmf-type to rfc2833; it works with internal applications (like > voicemail) but does not work through the Cisco as it misinterprets the > rfc2833 > > > Is there a way to set some variable (or a parameter to the bridge > application) to do the translation? > > Thanks! __Yehavi: > > _______________________________________________ > FreeSWITCH-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >
_______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
