Hallo, as mentioned here:
http://www.thomas-krenn.com/de/wiki/FreeIPMI_kann_OEM_Sensor_nicht_auslesen_-_CPU_Temp_liefert_nur_N/A#Problem:_OEM_Sensor_wird_nicht_richtig_ausgelesen I request a processing of the cpu temp sensors for the following mainboard: Supermicro X9SPU-F-O (Single) The output of the following commands follows: ipmi-sensors -V ipmi-sensors --flush-cache ipmi-sensors --interpret-oem-data --output-sensor-state ipmi-sensors --interpret-oem-data --output-sensor-state --ignore-not-available-sensors ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=[IDs der betroffenen Records] ################################################### /usr/local/sbin/ipmi-sensors -V ipmi-sensors - 1.2.4 Copyright (C) 2003-2012 FreeIPMI Core Team This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. ################################################### /usr/local/sbin/bmc-info -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 1.65 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Super Micro Computer Inc. (10876) Product ID : 1603 GUID : 00000000-0000-0000-0000-000000000000 ipmi_cmd_get_system_info_parameters_system_firmware_version_first_set: privilege level insufficient ################################################### [root@xxxx ~]# ipmi-sensors --flush-cache Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-xxxx.localhost ################################################### [root@xxxx ~]# /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin --interpret-oem-data --output-sensor-state ID | Name | Type | State | Reading | Units | Event 4 | System Temp | Temperature | Nominal | 17.00 | C | 'OK' 71 | Peripheral Temp | Temperature | Nominal | 26.00 | C | 'OK' 138 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h' 205 | FAN 1 | Fan | Nominal | 4725.00 | RPM | 'OK' 272 | FAN 2 | Fan | Nominal | 4725.00 | RPM | 'OK' 339 | FAN 3 | Fan | Nominal | 4725.00 | RPM | 'OK' 406 | FAN 4 | Fan | Nominal | 4425.00 | RPM | 'OK' 473 | FAN 5 | Fan | Nominal | 4950.00 | RPM | 'OK' 540 | Vcore | Voltage | Nominal | 0.98 | V | 'OK' 607 | 3.3VCC | Voltage | Nominal | 3.31 | V | 'OK' 674 | 12V | Voltage | Nominal | 12.19 | V | 'OK' 741 | VDIMM | Voltage | Nominal | 1.51 | V | 'OK' 808 | 5VCC | Voltage | Nominal | 5.12 | V | 'OK' 875 | -12V | Voltage | Nominal | -12.09 | V | 'OK' 942 | VBAT | Voltage | Nominal | 3.14 | V | 'OK' 1009 | VSB | Voltage | Nominal | 3.39 | V | 'OK' 1076 | AVCC | Voltage | Nominal | 3.33 | V | 'OK' 1143 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK' 1210 | PS Status | Power Supply | Nominal | N/A | N/A | 'Presence detected' [root@xxxx ~]# ################################################### /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin --interpret-oem-data --output-sensor-state --ignore-not-available-sensors ID | Name | Type | State | Reading | Units | Event 4 | System Temp | Temperature | Nominal | 17.00 | C | 'OK' 71 | Peripheral Temp | Temperature | Nominal | 26.00 | C | 'OK' 138 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h' 205 | FAN 1 | Fan | Nominal | 4800.00 | RPM | 'OK' 272 | FAN 2 | Fan | Nominal | 4725.00 | RPM | 'OK' 339 | FAN 3 | Fan | Nominal | 4800.00 | RPM | 'OK' 406 | FAN 4 | Fan | Nominal | 4425.00 | RPM | 'OK' 473 | FAN 5 | Fan | Nominal | 4800.00 | RPM | 'OK' 540 | Vcore | Voltage | Nominal | 0.98 | V | 'OK' 607 | 3.3VCC | Voltage | Nominal | 3.31 | V | 'OK' 674 | 12V | Voltage | Nominal | 12.19 | V | 'OK' 741 | VDIMM | Voltage | Nominal | 1.51 | V | 'OK' 808 | 5VCC | Voltage | Nominal | 5.12 | V | 'OK' 875 | -12V | Voltage | Nominal | -12.09 | V | 'OK' 942 | VBAT | Voltage | Nominal | 3.14 | V | 'OK' 1009 | VSB | Voltage | Nominal | 3.39 | V | 'OK' 1076 | AVCC | Voltage | Nominal | 3.33 | V | 'OK' 1143 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK' 1210 | PS Status | Power Supply | Nominal | N/A | N/A | 'Presence detected' [root@xxxx ~]# /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin --interpret-oem-data --output-sensor-state -v --record-ids=138 Record ID: 138 ID String: CPU Temp Sensor Type: OEM Reserved (C0h) Sensor Number: 18 IPMB Slave Address: 10h Sensor Owner ID: 20h Sensor Owner LUN: 0h Channel Number: 0h Entity ID: processor (3) Entity Instance: 1 Entity Instance Type: Physical Entity Event/Reading Type Code: 70h Sensor State: N/A Sensor Event: 'OEM Event = 0000h' kind regards holger _______________________________________________ Freeipmi-users mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-users
