Hi Folks - I'm using FreeIPMI 0.7.8 on Solaris 10 on some Sun X4150 servers - these have had their Eloms updated to be Iloms running (from memory) 2.0.2.10 of the Ilom firmware.
With ipmimonitoring for the Power_Supply group I see: # ipmimonitoring | grep "Power Supply" 29 | PS0/VINOK | Power Supply | Warning | N/A | 'State Asserted' 30 | PS0/PWROK | Power Supply | Warning | N/A | 'State Asserted' 31 | PS0/CUR_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 32 | PS0/VOLT_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 33 | PS0/FAN_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 34 | PS0/TEMP_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 43 | PS1/VINOK | Power Supply | Warning | N/A | 'State Asserted' 44 | PS1/PWROK | Power Supply | Warning | N/A | 'State Asserted' 45 | PS1/CUR_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 46 | PS1/VOLT_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 47 | PS1/FAN_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' 48 | PS1/TEMP_FAULT | Power Supply | Nominal | N/A | 'State Deasserted' You see the problem? The '*OK' sensors are asserted, but in Warning state. Unfortunately I can't flip assertion in ipmi_monitoring_sensors.conf - i.e like this: IPMI_Power_Supply_State_Deasserted Critical IPMI_Power_Supply_State_Asserted Nominal because the '*_FAULT' sensors will then be in Critical. I've been trying to figure if I can get ipmimonitoring to simply not report some sensors (e.g the PS*/*_FAULT) ones above - but can't figure how to do this. Is it possible? -- View this message in context: http://www.nabble.com/Mixed-assertion-deassertion-problems-on-Sun-X4150-tp23561694p23561694.html Sent from the FreeIPMI - Users mailing list archive at Nabble.com. _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
