Hey Ihara, I found a bug on the way that was unrelated to this, but actually the MAC addresses are already output correctly. But they only are output in verbose mode. It seems you always ran w/ verbose mode the last time we dealt with this :-)
I'm going to go through the code and see if I should maybe make some changes in how verbosity is interpreted. When I originally wrote it, I think I only output "required fields" by default. Then extra stuff is output in verbose mode (the MAC address fields you're seeing are in the "oem defined extra" section of the fru format). Al On Tue, 2008-05-27 at 22:44 +0900, Shuichi Ihara wrote: > Al, > > >> I just tried the ipmitool to elom. An attached is output of ipmitool > >> with "fru". > >> As you mentioned, these information are from PSU, but it seems the ipmi > >> feature doesn't > >> work correctly and couldn't get information from these device. > > > > I'm thinking this is a problem on the firmware. I'll punt that issue > > off to you guys at Sun :-) > > picked up :) Thanks for your investigation. > I will try to ask internal right person about this issue. > > > > >> Also, I attached ipmi-fru output (without --debug), but I can't find MAC > >> address information > >> from this output. > > > > I guess a corner case in the parsing. Could you send me the --debug > > output? > > Please see attached file. > > Thanks, > > -Ihara -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
