Hi Florian, Out of my curiosity, did ipmi-locate return the same info on the dell poweredge 2600??
I'm not 100% on what your bug could be right now, but could you also try to flush the SDR cache using the -f option. There was a similar fread() error message on the FreeIPMI 0.4.X trunk that I fixed. I suppose it's possible it existed in 0.3.X too. Al > Hello > i'm testing freeipmi 0.3.3 on a freebsd 6.2 server (dell poweredge 2950). > Freeipmi was installed from ports and der is no newer version there at > the moment. > ipmi-locate gives me the following: > --------------------------<snip>------------------------------ > FILTER3.GGAMAUR.NET # ipmi-locate > Probing KCS device using DMIDECODE... done > IPMI Version: 2.0 > IPMI locate driver: DMIDECODE > IPMI interface: KCS > BMC driver device: > BMC I/O base address: CA8 > Register space: 4 > > Probing SMIC device using DMIDECODE... FAILED > Probing BT device using DMIDECODE... FAILED > Probing SSIF device using DMIDECODE... FAILED > Probing KCS device using SMBIOS... FAILED > Probing SMIC device using SMBIOS... FAILED > Probing BT device using SMBIOS... FAILED > Probing SSIF device using SMBIOS... FAILED > Probing KCS device using ACPI... FAILED > Probing SMIC device using ACPI... FAILED > Probing BT device using ACPI... FAILED > Probing SSIF device using ACPI... FAILED > Probing KCS device using PCI... FAILED > Probing SMIC device using PCI... FAILED > Probing BT device using PCI... FAILED > Probing SSIF device using PCI... FAILED > > KCS device default values: > IPMI Version: 1.5 > IPMI locate driver: DEFAULT > IPMI interface: KCS > BMC driver device: > BMC I/O base address: CA2 > Register space: 1 > > SMIC device default values: > IPMI Version: 1.5 > IPMI locate driver: DEFAULT > IPMI interface: SMIC > BMC driver device: > BMC I/O base address: CA9 > Register space: 1 > > BT device default values: > > SSIF device default values: > IPMI Version: 1.5 > IPMI locate driver: DEFAULT > IPMI interface: SSIF > BMC driver device: /dev/i2c-0 > BMC SMBUS slave address: 42 > Register space: 1 > --------------------------<snap>------------------------------ > And ipmi-sensors that: > --------------------------<snip>------------------------------ > FILTER3.GGAMAUR.NET # ipmi-sensors > FAILED: _fread_record: Invalid argument > Fetching SDR repository information... Bus error: 10 > --------------------------<snap>------------------------------ > > I tried the same on an older Dell Poweredge 2600 and there it works > without a problem. > Could anybody give me a hint what it could be? > > Regards > Florian > > > > > > _______________________________________________ > Freeipmi-users mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/freeipmi-users > -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
