On 03/27/2017 09:40 PM, Jakub Hrozek wrote:
On Mon, Mar 27, 2017 at 06:34:24PM +0200, David Goudet wrote:
Hi,
Thanks to dyndns_update=True parameter, SSSD service on client machine updating
host DNS entry in FreeIPA.
Everything is fine on machines which have only one IP adress on network
interface.
I have problem with machines which have more that one IP address on network
interface: if machine have two IP address, SSSD update host DNS entry with
these two IP address.
To reproduce the problem:
Host have -IP1- and i add -IP2-
ip addr add -IP2-/26 dev em1
ip addr list:
em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1496 qdisc mq state UP qlen 1000
link/ether xxxx
inet -IP1-/26 brd XXXX scope global em1
inet -IP2-/26 scope global secondary em1
valid_lft forever preferred_lft forever
DNS resolution (dig) before restarting sssd returns only -IP1-. After restarting
sssd returns -IP1- & -IP2-
In dyndns_update manpage, we have "The IP address of the IPA LDAP connection is used
for the updates", what does it means? Is it IP address of the DNS server (used to
update the DNS entry)? or is it IP address on client machine used during LDAP TCP bind
(-IP1- in my case)?
dyndns_update (boolean)
Optional. This option tells SSSD to automatically update the DNS
server built into FreeIPA v2 with the IP address of this client.
The update is secured using GSS-TSIG. The IP address of the IPA
LDAP connection is used for the updates, if it is not otherwise
specified by using the “dyndns_iface” option.
Is it normal behaviour that SSSD add in host DNS entry every IPs enabled on
client machine?
IIRC we added this to support multiple interfaces (user can choose which
one to use) and to update both IPv6 (AAAA) and IPv4 (A) records.
IPA/SSSD cannot reliably determine which IP address to use, it is all or
none from interface. With the previous behavior users want to use
different/more addresses than the one which has been detected from LDAP
connection and it was not possible previously.
Do you have set dyndns_iface in sssd.conf?
Martin
Looks like this was a deliberate change:
https://pagure.io/SSSD/sssd/issue/2558
but to be honest, I forgot why exactly we did this. Martin, do you know?
Is it possible to configure SSSD to update DNS with only IP address "primary"
in ip addr list or which is used to FreeIPA server communication (-IP1- used on TCP
binding)?
Only if the IP addresses are of different families (v4/v6), then it's
possible to restrict one of the families.
--
Manage your subscription for the Freeipa-users mailing list:
https://www.redhat.com/mailman/listinfo/freeipa-users
Go to http://freeipa.org for more info on the project
