Hi Fraser, thanks a lot for your quick reply! Could you confirm whether you are on RHEL / CentOS 7.2, and if so, > whether it was installed at 7.2 or an upgrade from 7.1 or an earlier > version? >
This is a replica that was previously installed in CentOS 7.1. I don't exactly remember but I think I used COPR repository to install FreeIPA 4.2 and then upgraded CentOS to 7.2. Also, I remember my pki got broken after upgrading this replica in 7.2. I had to renew the replica's certificate and force-sync to successfully launch pki-tomcatd. Now this replica is my pki master. > > ### certprofile > > $ ipa certprofile-show --out caIPAserviceCert.cfg caIPAserviceCert > > ----------------------------------------------------------- > > Profile configuration stored in file 'caIPAserviceCert.cfg' > > ----------------------------------------------------------- > > Profile ID: caIPAserviceCert > > Profile description: Standard profile for network services > > Store issued certificates: TRUE > > > You do not include the caIPAserviceCert.cfg in the diffs below, > however, I suspect you will find it to be identical to > /usr/share/pki/ca/profiles/ca/caIPAserviceCert.cfg. Could you > please confirm this? > Ah true... I did not realised I was actually writing a new file! And you're right, diff is the same (except 2 profileId/classId lignes that don't exist in template + enableBy that differs) FreeIPA since v4.2 configures Dogtag to use the LDAPProfileSubsystem > which stores profile configuration in LDAP. The file output by the > ``ipa certprofile-show`` command will have come from LDAP; this is > the version that's actually in use in your IPA installation. > Thanks a lot for your answers. So now, what would you suggest me to do? Replace my /tmp/caIPAserviceCert.cfg with your suggested values and import to LDAP ? Cheers, > > And a diff between them : > > > > $ diff /usr/share/ipa/profiles/caIPAserviceCert.cfg > > /usr/share/pki/ca/profiles/ca/caIPAserviceCert.cfg > > 1,2d0 > > < profileId=caIPAserviceCert > > < classId=caEnrollImpl > > 15c13 > > < policyset.serverCertSet.list=1,2,3,4,5,6,7,8,9,10,11 > > --- > > > policyset.serverCertSet.list=1,2,3,4,5,6,7,8 > > 22c20 > > < policyset.serverCertSet.1.default.params.name=CN=$$ > > request.req_subject_name.cn$$, $SUBJECT_DN_O > > --- > > > policyset.serverCertSet.1.default.params.name=CN=$ > > request.req_subject_name.cn$, OU=pki-ipa, O=IPA > > 48c46 > > < > > > policyset.serverCertSet.5.default.params.authInfoAccessADLocation_0=http:// > > $IPA_CA_RECORD.$DOMAIN/ca/ocsp > > --- > > > policyset.serverCertSet.5.default.params.authInfoAccessADLocation_0= > > 95,97c93,95 > > < > > > policyset.serverCertSet.9.default.params.crlDistPointsIssuerName_0=$CRL_ISSUER > > < > > > policyset.serverCertSet.9.default.params.crlDistPointsIssuerType_0=DirectoryName > > < > policyset.serverCertSet.9.default.params.crlDistPointsPointName_0=http:// > > $IPA_CA_RECORD.$DOMAIN/ipa/crl/MasterCRL.bin > > --- > > > policyset.serverCertSet.9.default.params.crlDistPointsIssuerName_0= > > > policyset.serverCertSet.9.default.params.crlDistPointsIssuerType_0= > > > policyset.serverCertSet.9.default.params.crlDistPointsPointName_0= > > https://ipa.example.com/ipa/crl/MasterCRL.bin > > 100,109d97 > > < policyset.serverCertSet.10.constraint.class_id=noConstraintImpl > > < policyset.serverCertSet.10.constraint.name=No Constraint > > < > > > policyset.serverCertSet.10.default.class_id=subjectKeyIdentifierExtDefaultImpl > > < policyset.serverCertSet.10.default.name=Subject Key Identifier > Extension > > Default > > < policyset.serverCertSet.10.default.params.critical=false > > < policyset.serverCertSet.11.constraint.class_id=noConstraintImpl > > < policyset.serverCertSet.11.constraint.name=No Constraint > > < policyset.serverCertSet.11.default.class_id=userExtensionDefaultImpl > > < policyset.serverCertSet.11.default.name=User Supplied Extension > Default > > < policyset.serverCertSet.11.default.params.userExtOID=2.5.29.17 > > > > Thanks by advance for your support, > > Regards > > > > -- > > Youenn Piolet > > [email protected] > > > > > > 2016-03-31 9:41 GMT+02:00 Fraser Tweedale <[email protected]>: > > > > > On Sun, Mar 27, 2016 at 09:14:47PM +0200, Martin Štefany wrote: > > > > Hello, > > > > > > > > I seem to be having some issues with IPA CA feature not generating > > > > certificates with DNS SubjectAltNames. > > > > > > > > I'm sure this worked very well under CentOS 7.1 / IPA 4.0, but now > under > > > > CentOS 7.2 / IPA 4.2 something's different. > > > > > > > > Here are the original steps which worked fine for my first use case > :: > > > > > > > > $ ipa dnsrecord-add example.com mail --a-ip=172.17.100.25 > > > > $ ipa host-add mail.example.com > > > > $ ipa service-add smtp/mail.example.com > > > > $ ipa service-add smtp/mail1.example.com > > > > $ ipa service-add-host smtp/mail.example.com --hosts= > mail1.example.com > > > > $ ipa-getcert request -k /etc/pki/tls/private/postfix.key \ > > > > -f /etc/pki/tls/certs/postfix.pem \ > > > > -N CN=mail1.example.com,O=EXAMPLE.COM \ > > > > -D mail1.example.com -D mail.example.com \ > > > > -K smtp/mail1.example.com > > > > (and repeat for every next member of the cluster...) > > > > > > > > After this, I would get certificate with something like :: > > > > $ sudo ipa-getcert list > > > > Number of certificates and requests being tracked: 3. > > > > Request ID '20150419153933': > > > > status: MONITORING > > > > stuck: no > > > > key pair storage: > > > > type=FILE,location='/etc/pki/tls/private/postfix.key' > > > > certificate: > type=FILE,location='/etc/pki/tls/certs/postfix.pem' > > > > CA: IPA > > > > issuer: CN=Certificate Authority,O=EXAMPLE.COM > > > > subject: CN=mail1.example.com,O=EXAMPLE.COM > > > > expires: 2017-04-19 15:39:35 UTC > > > > dns: mail1.example.com,mail.example.com > > > > principal name: smtp/[email protected] > > > > key usage: > > > > digitalSignature,nonRepudiation,keyEncipherment,dataEncipherment > > > > eku: id-kp-serverAuth,id-kp-clientAuth > > > > pre-save command: > > > > post-save command: > > > > track: yes > > > > auto-renew: yes > > > > > > > > with Subject line in form of: 'CN=<hostname>,O=EXAMPLE.COM' and > 'dns' > > > > info line present. > > > > > > > > Suddenly, in the current setup, after upgrade from 4.0 to 4.2, I'm > > > > getting this :: > > > > > > > > $ ipa dnsrecord-add example.com w3 --a-ip=172.17.17.80 --a-create- > > > > reverse > > > > $ ipa host-add w3.example.com > > > > $ ipa service-add HTTP/w3.example.com > > > > $ ipa service-add HTTP/http1.example.com > > > > $ ipa service-add-host HTTP/w3.example.com --hosts=http1.example.com > > > > $ ipa-getcert request -k /etc/pki/tls/private/httpd.key \ > > > > -f /etc/pki/tls/certs/httpd.pem \ > > > > -N CN=http1.example.com,O=EXAMPLE.COM \ > > > > -D http1.example.com -D w3.example.com \ > > > > -K HTTP/http1.example.com > > > > $ sudo ipa-getcert list > > > > Number of certificates and requests being tracked: 3. > > > > Request ID '20160327095125': > > > > status: MONITORING > > > > stuck: no > > > > key pair storage: > > > > type=FILE,location='/etc/pki/tls/private/http.key' > > > > certificate: type=FILE,location='/etc/pki/tls/certs/http.pem' > > > > CA: IPA > > > > issuer: CN=Certificate Authority,O=EXAMPLE.COM > > > > subject: CN=http1.example.com,OU=pki-ipa,O=IPA > > > > expires: 2018-03-28 09:51:27 UTC > > > > key usage: > > > > digitalSignature,nonRepudiation,keyEncipherment,dataEncipherment > > > > eku: id-kp-serverAuth,id-kp-clientAuth > > > > pre-save command: > > > > post-save command: > > > > track: yes > > > > auto-renew: yes > > > > > > > > Where's the 'CN=<hostname>,OU=pki-ipa,O=IPA' coming from instead of > > > > 'CN=<hostname>,O=EXAMPLE.COM' and why are DNS SubjectAltNames > missing? > > > > > > > > To be clear, if I don't do :: > > > > $ ipa service-add-host HTTP/w3.example.com --hosts=http1.example.com > > > > > > > > then certificate is just not issued with 'REJECTED', but once this is > > > > done properly in described steps, DNS SANs are not happening. > > > > > > > > I've tried ipa-getcert from both CentOS 7.2 and Fedora 23, but only > > > > against my current IPA 4.2 on CentOS 7.2. > > > > > > > > For the actual certificates :: > > > > $ sudo openssl x509 -in /etc/pki/tls/certs/postfix.pem -noout -text > > > > Certificate: > > > > Data: > > > > Version: 3 (0x2) > > > > Serial Number: 15 (0xf) > > > > Signature Algorithm: sha256WithRSAEncryption > > > > Issuer: O=EXAMPLE.COM, CN=Certificate Authority > > > > Validity > > > > Not Before: Apr 19 15:39:35 2015 GMT > > > > Not After : Apr 19 15:39:35 2017 GMT > > > > Subject: O=EXAMPLE.COM, CN=mail1.example.com > > > > Subject Public Key Info: > > > > Public Key Algorithm: rsaEncryption > > > > Public-Key: (2048 bit) > > > > Modulus: > > > > [cut] > > > > Exponent: 65537 (0x10001) > > > > X509v3 extensions: > > > > X509v3 Authority Key Identifier: > > > > keyid:[cut] > > > > > > > > Authority Information Access: > > > > OCSP - URI:http://ipa-ca.example.com/ca/ocsp > > > > > > > > X509v3 Key Usage: critical > > > > Digital Signature, Non Repudiation, Key Encipherment, > > > > Data Encipherment > > > > X509v3 Extended Key Usage: > > > > TLS Web Server Authentication, TLS Web Client > > > > Authentication > > > > X509v3 CRL Distribution Points: > > > > > > > > Full Name: > > > > URI: > http://ipa-ca.example.com/ipa/crl/MasterCRL.bin > > > > CRL Issuer: > > > > DirName: O = ipaca, CN = Certificate Authority > > > > > > > > X509v3 Subject Key Identifier: > > > > [cut] > > > > X509v3 Subject Alternative Name: > > > > DNS:mail1.example.com, DNS:mail.example.com, > > > > othername:<unsupported>, othername:<unsupported> > > > > Signature Algorithm: sha256WithRSAEncryption > > > > [cut] > > > > > > > > vs. > > > > > > > > $ sudo openssl x509 -in /etc/pki/tls/certs/http.pem -text -noout > > > > Certificate: > > > > Data: > > > > Version: 3 (0x2) > > > > Serial Number: 71 (0x47) > > > > Signature Algorithm: sha256WithRSAEncryption > > > > Issuer: O=EXAMPLE.COM, CN=Certificate Authority > > > > Validity > > > > Not Before: Mar 27 09:51:27 2016 GMT > > > > Not After : Mar 28 09:51:27 2018 GMT > > > > Subject: O=IPA, OU=pki-ipa, CN=http1.example.com > > > > Subject Public Key Info: > > > > Public Key Algorithm: rsaEncryption > > > > Public-Key: (2048 bit) > > > > Modulus: > > > > [cut] > > > > Exponent: 65537 (0x10001) > > > > X509v3 extensions: > > > > X509v3 Authority Key Identifier: > > > > keyid:[cut] > > > > > > > > Authority Information Access: > > > > OCSP - URI:http://idmc1.example.com:80/ca/ocsp > > > > > > > > X509v3 Key Usage: critical > > > > Digital Signature, Non Repudiation, Key Encipherment, > > > > Data Encipherment > > > > X509v3 Extended Key Usage: > > > > TLS Web Server Authentication, TLS Web Client > > > > Authentication > > > > Signature Algorithm: sha256WithRSAEncryption > > > > [cut] > > > > > > > > so even reference to CRL is missing here, but OCSP is present. > > > > > > > > > > > > Sorry if this is duplicate, but from what I was able to find, DNS > > > > SubjectAltNames are reported working since CentOS 7.1, and I think > I'm > > > > consistent with http://www.freeipa.org/page/PKI, unless I miss > something > > > > obvious here. > > > > > > > > For new features like certificate profiles and ACLs, I haven't > changed > > > > any defaults as far as I know as there was no need for that. > > > > > > > > > > > > Thank you for any support in advance! And Happy Easter! > > > > > > > > Martin > > > > > > Hi Martin, > > > > > > Thanks for the detailed info. Could you please provide the > > > Dogtag configuration for the default profile, `caIPAserviceCert'? > > > > > > ipa certprofile-show --out caIPAserviceCert.cfg caIPAserviceCert > > > > > > (Then provide the contents of caIPAserviceCert.cfg) > > > > > > Could you also provide the contents of file > > > `/etc/pki/pki-tomcat/ca/CS.cfg'? > > > > > > Regards, > > > Fraser > > > > > > -- > > > Manage your subscription for the Freeipa-users mailing list: > > > https://www.redhat.com/mailman/listinfo/freeipa-users > > > Go to http://freeipa.org for more info on the project >
-- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
