On 11/06/2012 10:38 AM, Petr Spacek wrote: > Hello Mike, > > are you talking about IPA WebUI or CLI or DNS dynamic update mechanism? On > which distribution and IPA version? > > On 11/05/2012 10:35 PM, Michael Mercier wrote: >> Hello, >> >> A couple of questions regarding DNS / Allow PTR sync. >> >> 1. If you have a zone 'example.com' and you enable "Allow PTR sync", should >> you also enable the option in the reverse zone (e.g. 168.192.in-addr-arpa.)? > In webUI - just check the box "Create reverse" while adding a new A record. > "Allow PTR sync" affects only DNS dynamic update. > >> 2. Do you have to wait a specified amount of time for the PTR record to be >> removed after you remove a host? > No, you don't. Change in webUI should be done immediately. For some time you > can see old data on DNS clients because DNS caches all the data extensively. > >> >> e.g. >> >> 1. Add 'testhost', 192.168.10.10 to 'example.com' (with Allow PTR sync >> enabled on the zone) with 'Create reverse' enabled. >> 2. Remove 'testhost' from 'example.com' >> 3. Check 168.192.in-addr.arpa. zone and host 'testhost' still exists.
Did you have "Remove entries from DNS" checkbox checked when removing a host? Alternatively, you would need to use --updatedns option if you were running it via CLI. If yes, then please file a ticket as Petr suggested. Thank you, Martin _______________________________________________ Freeipa-users mailing list [email protected] https://www.redhat.com/mailman/listinfo/freeipa-users
