On Tue, Jun 04, 2024 at 03:49:24PM +0200, Marc Gonzalez wrote: > From: Arnaud Vrac <[email protected]> > > Port device nodes from vendor code. > > Signed-off-by: Arnaud Vrac <[email protected]> > Signed-off-by: Marc Gonzalez <[email protected]> > --- > arch/arm64/boot/dts/qcom/msm8998.dtsi | 100 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 99 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi > b/arch/arm64/boot/dts/qcom/msm8998.dtsi > index ba5e873f0f35f..f65a76da61ea8 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -2785,7 +2785,7 @@ mmcc: clock-controller@c8c0000 { > <&mdss_dsi0_phy 0>, > <&mdss_dsi1_phy 1>, > <&mdss_dsi1_phy 0>, > - <0>, > + <&hdmi_phy 0>, > <0>, > <0>, > <&gcc GCC_MMSS_GPLL0_DIV_CLK>; > @@ -2890,6 +2890,14 @@ dpu_intf2_out: endpoint { > remote-endpoint = > <&mdss_dsi1_in>; > }; > }; > + > + port@2 { > + reg = <2>; > + > + dpu_intf3_out: endpoint { > + remote-endpoint = > <&hdmi_in>; > + }; > + }; > }; > }; > > @@ -3045,6 +3053,96 @@ mdss_dsi1_phy: phy@c996400 { > > status = "disabled"; > }; > + > + hdmi: hdmi-tx@c9a0000 { > + compatible = "qcom,hdmi-tx-8998"; > + reg = <0x0c9a0000 0x50c>, > + <0x00780000 0x6220>, > + <0x0c9e0000 0x2c>; > + reg-names = "core_physical", > + "qfprom_physical", > + "hdcp_physical"; > + > + interrupt-parent = <&mdss>; > + interrupts = <8>; > + > + clocks = <&mmcc MDSS_MDP_CLK>, > + <&mmcc MNOC_AHB_CLK>, > + <&mmcc MDSS_AHB_CLK>, > + <&mmcc MDSS_AXI_CLK>, > + <&mmcc MISC_AHB_CLK>, > + <&mmcc MDSS_HDMI_CLK>, > + <&mmcc MDSS_HDMI_DP_AHB_CLK>, > + <&mmcc MDSS_EXTPCLK_CLK>; > + clock-names = > + "mdp_core",
Nit: usually there is no line wrap here, but it's fine from my POV. > + "mnoc", > + "iface", > + "bus", > + "iface_mmss", > + "core", > + "alt_iface", > + "extp"; > + Reviewed-by: Dmitry Baryshkov <[email protected]> -- With best wishes Dmitry
