сб, 13 апр. 2019 г. в 08:46, Rugxulo <[email protected]>: > > Did you try clean boot (F5) and/or removing (or even replacing?) some drivers? >
Thank you very much Rugxulo, with a clean boot (F5) I could reach the command line :-) сб, 13 апр. 2019 г. в 08:46, Rugxulo <[email protected]>: > > Perhaps you need to try a different floppy image? I could point you to several > Yes, if they could help to debug this issue. By the way, the only version which I tested at coreboot at both QEMU and real hardware - is FreeDOS 1.2 - and it has exactly the same problem with coreboot/QEMU while working fine at coreboot/real hardware. So I think the same situation would be with 1.3 RC1 (don't have the time to test at the moment). сб, 13 апр. 2019 г. в 08:46, Rugxulo <[email protected]>: > > I find CoreBoot a bit too confusing to test, and I don't have a > good set of compatible hardware anyways Luckily (if you'd like) you could use the instructions from my previous letter to run this special coreboot-from-QEMU build and update a floppy inside of it. (so no need to rebuild a coreboot or to have any coreboot-supported hardware). If there are any problems with this instruction, please let me know and I'll try my best to help you get this running ;-) Best regards, Ivan Ivanov _______________________________________________ Freedos-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freedos-devel
