Similar observation at 12-Stable and 13-current. Thanks Shivam
-----Original Message----- From: GARG Shivam Sent: Monday, August 24, 2020 12:01 PM To: Hans Petter Selasky <[email protected]>; [email protected] Subject: RE: Gadget serial driver support addition Hi HPS, Please find the dmesg and usbconfig output with 12.1-RELEASE Installing the 12-STABLE and 13-current and will update you by tomorrow. dmesg output... ===== usbd_req_re_enumerate: addr=1, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=1, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usb_alloc_device: Failure selecting configuration index 0:USB_ERR_TIMEOUT, port 3, addr 1 (ignored) ===== usbconfig output... ==== ugen0.2: <Linux 4.1.8-rt8+gbd51baffc04e with fsl-usb2-udc Gadget Serial v2.4> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.1: <Intel EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen2.2: <vendor 0x8087 product 0x8000> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <vendor 0x8087 product 0x8008> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.3: <Broadcom Corp 5880> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen1.3: <CN0767N97248757EB6DZA01 LaptopIntegratedWebcamHD> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen0.2: <Linux 4.1.8-rt8+gbd51baffc04e with fsl-usb2-udc Gadget Serial v2.4> at usbus0, cfg=255 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) ==== Thanks Shivam -----Original Message----- From: Hans Petter Selasky <[email protected]> Sent: Friday, August 21, 2020 11:24 PM To: GARG Shivam <[email protected]>; [email protected] Subject: Re: Gadget serial driver support addition On 2020-08-21 19:45, GARG Shivam wrote: > Hi All, > > I am using the Gadget Serial driver Vendor ID : 0x0525 and Product ID > : 0xa4a7 as a USB serial driver. FreeBSD 12.1 does not recognize this > device and continuously enumerate the device > > Can anyone help me how I can add this support into my FreeBSD. > >>From the Gadget Serial page, FreeBSD need to support the "Support for >>Host-side USB". Any direction will make my day. Hi, What is printed in dmesg? What does usbconfig say? Have you tried a 12-stable kernel? Can you try to boot a 13-current kernel? --HPS _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
