On 10/01/17 19:09, Tomasz CEDRO wrote:
On Sun, Oct 1, 2017 at 6:40 PM, Ian Lepore <[email protected]> wrote:
On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote:
On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <[email protected]
wrote:
On 09/27/17 00:37, Ian Lepore wrote:
On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote:
On 09/27/17 00:11, Tomasz CEDRO wrote:
https://github.com/freebsd/freebsd/pull/115
:-)
The devd.conf rule should match more than just vendor and
product:
+# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot.
+# Note: This requires additional "gobi_loader" utility to be
installed,
+# as well as valid QDL driver firmware files placed in
/boot/firmware/gobi.
+# If modem does not accept valid firmware try gobi_loader
-2000
switch.
+# Please adjust modem VID/PID to match your device supported
by
u3g
module.
+#attach 100 {
+# match "vendor" "0x04da";
+# match "product" "0x250e";
+# action "/usr/local/sbin/gobi_loader /dev/cuaU0
/boot/firmware/gobi/";
+#};
Else patch looks good.
--HPS
Hard-coding /dev/cuaU0 cannot possibly be right.
-- Ian
These three lines are missing:
match "system" "DEVFS";
match "subsystem" "CDEV";
match "type" "CREATE";
--HPS
Thanks! Updated! :-)
https://github.com/freebsd/freebsd/pull/115
If this is to be an example, it should be correct. Please replace the
"cuaU0" with "$cdev". (See /etc/devd/uath.conf for an example).
-- Ian
Thanks Ian! Is it okay now? I have moved this example to dedicated
/etc/devd/u3g.conf file, and added u3g load to /etc/devd/usb.conf.. if
syntax is okay I will verify on my laptop..
https://github.com/freebsd/freebsd/pull/115
Looks good to me. Don't forget to MFC!
--HPS
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
