Hi,
I believe this is the relevant output of pciconf for the usb controllers:
"ehci0@pci0:0:26:0: class=0x0c0320 card=0x75811462 chip=0x3b3c8086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:0: class=0x0c0320 card=0x75811462 chip=0x3b348086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB"
It is a MSI P55-GD80 mainboard. The usb 2 devices are available in the
virtualbox usb menu but not useable in windows.
Thanks for your help.
Jurgen
-----Original-Nachricht-----
Betreff: Re: USB Virtualbox
Datum: Thu, 14 May 2015 07:50:03 +0200
Von: Hans Petter Selasky <[email protected]>
An: "[email protected]" <[email protected]>, [email protected]
On 05/13/15 17:05, [email protected] wrote:
> Hi everyone,
>
> I try to get my iPad recognized with a Windows 7 guest and Virtualbox under
> freebsd 10 host.
>
> Because there is no usb 2.0 support for freebsd-virtualbox I try to force it
> to usb 1.
>
> I am using "sysctl hw.usb.ehci.no_hs=1" as mentioned here
> http://www.clearchain.com/blog/posts/how-to-use-freebsd-virtualbox-and-usb2-0-devices
>
> But even after disconnecting and reconnecting iPad is still is at usb 2.0
> speed.
>
> Is there another way to use usb devices in Virtualbox?
>
Hi,
Can you show what USB controllers are present. If you have XHCI, you
need to set the port routing mask and the no_hs sysctls at the same time.
--HPS
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
