I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies itself as:
# /var/log/messages
Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN, class 0/0, rev
2.00/0.01, addr 3> on usbus1
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY.
CDB: 0 0 0 0 0 0
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI
Status Error
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check
Condition
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT
READY asc:3a,0 (Medium not present)
Nov 11 13:40:09 wiggles kernel: cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0
Nov 11 13:40:09 wiggles kernel: cd1: <Motorola USB Card > Removable CD-ROM
SCSI-0 device
Nov 11 13:40:09 wiggles kernel: cd1: 40.000MB/s transfers
Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size failed: NOT
READY, Medium not present
# usbconfig -u 1 -a 3 dump_curr_config_desc
ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=ON
Configuration index 0
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0020
bNumInterfaces = 0x0001
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x00c8
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x0008
bInterfaceSubClass = 0x0006
bInterfaceProtocol = 0x0050
iInterface = 0x0000 <no string>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0001 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Unfortunately it's not recognized by the ural driver. Has anyone an idea what I
could try? Add a usb device ID somewhere?
Emanuel
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
