-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am trying to use my telephone to connect to the Internet, but had no success with FreeBSD.
I have used under Debian with USB over ethernet and it does connect without problems, but I would like to make it work in FreeBSD as well. Any help will be greatly appreciated. ====================== uname output ================================================ FreeBSD epia.mmbb.org 7.2-STABLE FreeBSD 7.2-STABLE #4: Fri Jun 19 10:45:18 EDT 2009 [email protected]:/usr/obj/usr/src/sys/MYKE i386 ====================== uname output ================================================ 0) sudo kldload if_cdce kldstat Id Refs Address Size Name 1 28 0xc0400000 52ecdc kernel 2 1 0xc092f000 6bdd8 if_ath.ko 3 6 0xc099b000 2c19c wlan.ko 4 1 0xc09c8000 7ef4 snd_via8233.ko 5 2 0xc09d0000 4a35c sound.ko 6 1 0xc0a1b000 193c accf_data.ko 7 1 0xc0a1d000 5200 wlan_scan_sta.ko 8 1 0xc0a23000 1924 wlan_scan_ap.ko 9 1 0xc0a25000 1b38 wlan_xauth.ko 10 1 0xc0a27000 431c wlan_tkip.ko 11 1 0xc0a2c000 5354 sem.ko 12 1 0xc0a32000 6a48c acpi.ko 13 1 0xc40da000 7000 linprocfs.ko 14 1 0xc40e1000 23000 linux.ko 15 1 0xc412a000 9000 if_bridge.ko 16 1 0xc4133000 6000 bridgestp.ko 17 1 0xc4441000 2000 accf_http.ko 18 1 0xc7f63000 4000 if_cdce.ko 1) Connect the USB cable [ phone <-> computer ]. 2) The phone emits a sound asking me to open the flip and select an option. 3) I select "Phone mode" and the phone displays "Your phone is now ready to be used with the computer". 4) dmesg (relevant section): umass0: <Sony Ericsson Memory Stick, class 0/0, rev 2.00/0.00, addr 2> on uhub0 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Eri Memory Stick 0> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:1): Medium not present (probe0:umass-sim0:0:0:1): Unretryable error da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Sony Eri Memory Stick 0> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present GEOM_LABEL: Label for provider da1s1 is msdosfs/PHONE CARD. GEOM_LABEL: Label msdosfs/PHONE CARD removed. GEOM_LABEL: Label for provider da1s1 is msdosfs/PHONE CARD. umass0: at uhub0 port 1 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry (da1:umass-sim0:0:0:1): lost device (da1:umass-sim0:0:0:1): removing device entry GEOM_LABEL: Label msdosfs/PHONE CARD removed. umass0: detached ugen0: <Sony Ericsson Sony Ericsson TM506, class 2/0, rev 2.00/0.00, addr 2> on uhub0 ugen0: at uhub0 port 1 (addr 2) disconnected ugen0: detached cdce0: <Sony Ericsson Sony Ericsson TM506, class 2/0, rev 2.00/0.00, addr 2> on uhub0 cdce0: could not find data bulk in device_attach: cdce0 attach returned 6 [ma...@epia /usr/home/manny]$ 5) ifconfig ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:40:96:ac:3c:ac media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> status: associated ssid "Riverside Park" channel 4 (2427 Mhz 11g) bssid 00:40:96:ac:3c:ac authmode WPA privacy MIXED deftxkey 3 TKIP 2:128-bit TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 protmode CTS burst dtimperiod 1 vr0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC> ether 00:30:18:a8:0b:35 inet 208.205.31.42 netmask 0xffffff00 broadcast 208.205.31.255 media: Ethernet autoselect (100baseTX) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 1e:d5:93:86:27:cb id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: ath0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 370370 member: vr0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 2 priority 128 path cost 200000 6) ls /dev/ | grep c acd0 acpi ad0s1c console consolectl ctty devctl geom.ctl mdctl nfslock pci ttyvc - -- L8R We are prisoners of ideas. - -- Ralph Waldo Emerson __ /// __ /// \\\/// \XX/ FreeBSD 7-STABLE -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (FreeBSD) iEYEARECAAYFAkuWfHwACgkQ0Nrv8E+By332mQCgscxKiPNi1qabw6IVXpPvyyQq KzcAnjSPGHh/D7XmCCETKufOeJLeTknD =4hGQ -----END PGP SIGNATURE-----
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
