>Number: 144199 >Category: usb >Synopsis: uvisor(4) - AlphaSmart Dana incorrect stall clearing >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Feb 22 07:30:01 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Stephen Hurd >Release: 8-STABLE >Organization: >Environment: FreeBSD ace.hurd.local 8.0-STABLE FreeBSD 8.0-STABLE #0: Tue Feb 16 01:20:04 PST 2010 [email protected]:/tmp/obj/usr/src/sys/ACE i386
>Description: With the AlphaSmart Dana (VID=0x081e, PID=0xdf00) the uvisor driver does not function (no I/O) unless the two stall clears after the "clear stall at first run" comment are removed. >How-To-Repeat: 1) Connect an AlphaSmart Dana via USB 2) Select HotSync on the Dana 3) After uvisor attaches, run ``pilot-xfer -p /dev/cuaU0 -l'' 4) pilot-xfer will hang, Dana will timeout, and the device will detach >Fix: Remove or make conditional the initial stall clears. It's not obvious to me why this code is there, so I don't know which is more appropriate. >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
