I was requested to install FreeBSD 11.3 on a new Dell machine with only
2 NVME drives in ZFS mirror. The problem is that installer does not see
the drives. Are there any special procedure to use NVME drives for
installation a later for booting?
Drives are described in iDRAC:
Device Description: PCIe SSD in Slot 1 in Bay 1
Device Protocol: NVMe-MI1.0
Model: Dell Express Flash NVMe P4510 1TB SFF
Bus: 130
Manufacturer: INTEL
Product ID: a54
Revision: VDV1DP23
Enclosure: PCIe SSD Backplane 1
There is no special HW RAID card.
I switched to a shell in an installer and NVME drives are not listen in
dmesg.boot.
I tried to manually load nvme and nvd modules but the error messages
says they are already in the installer kernel.
How can I make it work?
Kind regards
Miroslav Lachman
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
