Was running "FreeBSD 11.2-RELEASE-p4 (SHEEVAPLUG) #4 r339336M: Sat Oct 13 23:31:51 CEST 2018". Compiled 11.3-BETA1, installed kernel.bin in /boot/msdos and started it. Output below. It hangs. I guess in starting the random/entropy stuff.

Any thoughts or advise?
Don't spend to much time on it, I'm happy to phase it out.

Regards,
Ronald.


Rebooting...

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: SHEEVA PLUG LE

U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE80

Soc: 88F6281 A0 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size 256MB
DRAM CS[1] base 0x10000000   size 256MB
DRAM Total size 512MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:512 MB

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled


USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  0
(Re)start USB...
USB:   scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
reading kernel.bin
.
........................................................................................................................................................................................................................................................................................................................................................................................................................................

4345316 bytes read
## Starting application at 0x00900000 ...
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-BETA1 #0 r348277M: Sun May 26 14:17:08 CEST 2019
builder@rpi3:/data/src/obj-11.3/arm.arm/data/src/11.3/sys/SHEEVAPLUG arm FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
  Little-endian DC enabled IC disabled WA disabled DC streaming enabled
  BTB disabled L2 enabled L2 prefetch enabled
  WB enabled LABT branch prediction disabled
  16KB/32B 4-way instruction cache
  16KB/32B 4-way write-back-locking-C data cache
real memory  = 536866816 (511 MB)
avail memory = 518778880 (494 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
  Instruction cache prefetch enabled, data cache prefetch enabled
  256KB 4-way set-associative write-through unified L2 cache
random: entropy device external interface
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"

Reply via email to