Good job Denny, I am happy to hear you made it work.
On Fri, Mar 25, 2011 at 7:38 AM, Freddie Cash <[email protected]> wrote: > On Fri, Mar 25, 2011 at 5:28 AM, Denny Schierz <[email protected]> wrote: > > So, how complicated is load balancing with two Gb Network cards? :-) Ok, > > that should be a new thread;-) > > Simple as pie. Read through lagg(4) to see how it's done from the > command-line using ifconfig(8). > > ifconfig_lagg0="laggproto round-robin laggport em0 laggport em1 inet > 192.168.0.1/24" > That's actually an interesting problem (although it really belongs to a different thread). Freddie, have you tried this with an HP Procurve (say 2910al) switch. I did and a dual gigabit connection between two machines made the switch cpu utilization to jump from around 1% to 30%. I guess it might be HP specific problem due to the enormous mac address bounce between the two ports. I am curious to know if anybody else has experienced similar problems? It's a really important problem to solve since having zpool's that can achieve a gigabyte a second transfers makes little sense when you are limited by a gigabit (120MB/s) network connection to the rest of the world. Alternative to round-robin is only maybe LACP, but it doesn't really cut it when it comes to transfers between two nodes only due to the hashing that LACP uses. Or maybe 10GbE anyone? Cheers, -- Rumen Telbizov http://telbizov.com _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
