Found the problem, I had to set this during boot time. set hw.ata.ata_dma=0 set hw.ata.atapi_dma=0
Once I did that, it now installs. I am currently doing the install as I write this. Hope this helps anyone out there that is having this same issue. Btw, I burned 3 cd's using different brands and one was at 1x. Eddie -----Original Message----- From: Chad Leigh -- Shire.Net LLC [mailto:[EMAIL PROTECTED] Sent: Saturday, November 06, 2004 10:51 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: FreeBSD 5.3 Release and Dell Poweredge 6450 Install issues On Nov 6, 2004, at 11:43 PM, <[EMAIL PROTECTED]> wrote: > I get an error during the read of the CDROM install "acd0: FAILURE - > READ_BIG HARDWARE ERROR asc=0x08 ascq=0x03 error=4<ABORTED>" > > This did not occur on FreeBSD 5.2.1. > Is your CD bad? burn another and see if it works Chad _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
