Hello all, I am a new bye on the FreeBSD and I am looking at the VIMAGE features experiencing some problems. I added the options : VIMAGE if_bridge
and I removed STCP then I recompiled my kernel and install it. After that, following this tutorial http://imunes.tel.fer.hr/virtnet/eurobsdcon07_tutorial.pdf I tried the "Exercise 2" which consist on the following commands: vimage -c n1 vimage -c n2 ngctl mkpeer efface ether ether ngctl mkpeer efface ether ether ngctl mkpeer em0: bridge lower link0 ngctl name em0:lower bridge0 ngctl connect em0: bridge0: upper link1 ngctl connect ngeth0: bridge0: ether link2 ngctl connect ngeth1: bridge0: ether link3 vimage -i n1 ngeth0 e0 But my virtual interface on the n1 vimage does not receive any packet from the external network while I can see the packet go out from it. For instance using DHCP, e0 on n1 sends DHCP packets but it does not receive the answers (which are send, I verified it from wireshark), in adding the ARP request for his IP address (if I try to add it statically) are not received then it can not answer. At the end of the line the question is: how can I make this "virtual network" and the external real network be able to communicate ? Thanks in advance. Pietro. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
