On Wed, 23 May 2012, Robert Bonomi wrote:
From [email protected] Tue May 22 23:03:03 2012 Date: Tue, 22 May 2012 22:58:39 -0500 (CDT) From: Lars Eighner <[email protected]> To: [email protected] Subject: Connect to Clear hub modemThis is NOT a wireless question. I am running FreeBSD 8.3-p1. I want to connect to Clear Wireless Internet. I know I cannot do this with a Clear dongle, because Clear uses WiMax which is not supported. Instead I have a Clear hub modem. I want to connect by ethernet to it by wire. I get this from ifconfig: re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> ether 40:61:86:e9:96:0e media: Ethernet autoselect (100baseTX <full-duplex>) status: active But I don't have a clue what to do from here. The hub is supposed to have a web page at (imaginary address) 192.168.15.1, but I haven't been able to raise it.
Whoops! By imaginary, I meant not really on the internet, but in 198.168.x.x block reserved for private netting. This combination of things seems to work in rc.conf: network_interfaces="lo0 re0" ifconfig="DCHP" ifconfig_re0="inet 192.168.15.2 netmask 255.255.255.0" defaultrouter="192.168.15.1" This seems to be the basic setup for all Clear hub modems for fixed locations. It may or may not be a step in the right direct for Clear mobile hotspot type modems. I also added the nameservers that the hub told me about to resolv.conf although it is not clear to me that this is consulted. tun0 will stomp all over this configuration (which is, as a reminder, wire ethernet connection to Clear hub-modem) and pppoe is not pertinent on your side anyway. It is much simpler than I thought. You can leave /etc/ppp/ppp.conf alone in case you have to drop back - just don't invoke tunX in rc.conf. Also part of the learning experience before the original question: ethernet cables are not created equal. Use the one that comes in the modem box (four wire), not some two-wire cable you have lying around. Later today, dongles that will work with FreeBSD are expected to arrive, so we will see whether it is possible to get wireless connections to the Clear hub modem. -- Lars Eighner http://www.larseighner.com/index.html 8800 N IH35 APT 1191 AUSTIN TX 78753-5266 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
