nobody knows? or just this mail was missed within hundreds of trash about
why devil is a mascot or tips for installing windows.
I have motherboard with total 8 SATA ports but seems it's broken as i'm
having regular server hangs after heavy disk I/O, usually with messages about
disconnected AHCI device. cables ARE OK.
i bought extra controllers - 2 2-port PCIe based on said chipset.
to make things more strange - 2 of 8 motherboard SATA ports ARE JMB363 based
too!
on motherboard ports are all detected by AHCI driver.
THE same chips on cards are NOT detected as AHCI.
pciconv shows they are in ATA/RAID mode.
But builtin controller BIOS does not allow setting it in AHCI mode.
tried ata/atadisk driver - it doesn't attach disk at all, but just waits 15
seconds on each port where disk is connected at boot.
Disks ARE properly attached, as cards BIOS shows them up properly.
How can FreeBSD be set up to simply force switching to AHCI mode on that
chips?
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
