I am using FreeBSD 8.1 / amd64 with Platform Version 4.5.1 (KDE 4.5.1) if that matters.Before updating my system to FreeBSD 8.1 / amd64, I had the 7.3 /32 bit version installed. I completely erased the HD prior to installed the newer version so as to eliminate any accumulated garbage that might be hanging around. Previously, I was able to play CD Audio files without any problem. The "cdcontrol" program worked fine and I was able to play music files while using KDE using its audio player.
I now find that I can no-longer achieve that goal. When I place an audio CD into the PC, this error message is displayed: (It will probably wrap) Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) This is from the system log: (Sorry, but it will probably line wrap) Sep 25 07:51:22 cyborg kernel: acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 40 0 Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): CAM status: SCSI Status Error Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): SCSI status: Check Condition Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track) Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): cddone: got error 0x6 back I am at a loss here. I don't believe I made any radical changes from the configuration I was using in my older FreeBSD installation. I might add that MPlayer cannot see the drive either; although, it use to work fine. This problem exists whether KDE is running or not. The "cdcontrol" player will open and close the door on the device; however, no sound is emitted. Normal 'notification' sounds are emitted so I know the speakers, etc. are working correctly. The KDE start-up notifications works just fine. -- Carmel ✌ [email protected] _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
