Hi,
When using software based RAID controllers (e.g. ICH9R) in RAID-1 scenario, if
any of the drives fail and the server reboot, the system will not come back up.
This has been observed on FreeBSD 6.3-RELEASE i386 with following error:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xf4d988d8
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc0847e06
stack pointer = 0x28:0xc0c20bfc
frame pointer = 0x28:0xc0c20c40
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
I wasn't able to get the machine up into any mode except to the basic prompt.
This problem can also be duplicated if you move the drive from ICH9R RAID to
non-RAID controller
Any tips on how to get the FBSD system operational again without having to do a
reinstall?
Thanks,
Tamouh Hakmi
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
