I've got a dual display setup, and it had been working fine once I
finally got the config done. They're two displays running off one
graphics card, one through the DVI output and one through the D-SUB.
Today I had to switch the inputs that the monitors use, and it just
doesn't work anymore. I get a message on my left display that says
"Out of range." This isn't an Xorg or FreeBSD error, it's a message
from the displays built-in HUD. This doesn't make any sense because
as far as Xorg is concerned, there shouldn't be any difference. The
D-SUB display should be on the left, and the DVI one should be on the
right. I really don't understand what could be causing a problem, but
for what it's worth, the display now connected to the D-SUB has always
been more finicky than my other display. They're a ViewSonic vp201
(D-SUB) and Dell 2001fp (DVI). Here's my config:
Section "ServerLayout"
Identifier "Dual Head"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "true"
Option "Clone" "off"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Vendor Name"
ModelName "Model Name"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV25 [GeForce4 Ti 4600]"
BusID "PCI:1:0:0"
Screen 0
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV25 [GeForce4 Ti 4600]"
BusID "PCI:1:0:0"
Screen 1
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
