----- Original Message -----
From: "Sean Chittenden" <[EMAIL PROTECTED]>
You can *never* rely on, or use auto negotiation. Its very common to
have the switch be set to auto, the PC to be set to 100 FDX, and have
the switch settle on 100 half-duplex (Cisco switches in particular).
netstat -i will probably show you that you have line errors on your
em0 interface. If you're running on Cisco switches, see the
following:
In fact is also common to get errors when both are hardcoded the
only resolution being to set both to auto it all depends on the hardware.
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone (023) 8024 3137
or return the E.mail to [EMAIL PROTECTED]
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
