1: 0x26:DDS-4 variable 97000 DCLZ
2: 0x26:DDS-4 variable 97000 DCLZ
3: 0x26:DDS-4 variable 97000 DCLZ
---------------------------------
Current Driver State: at rest.
---------------------------------
File Number: 0 Record Number: 0 Residual Count 0
all fine.
However, attached to either controller (after a reboot of the machine and a
powercycle of the drive), I get:
[1:25:325]root@run:/home/foo> dd if=/dev/sa0 of=tape5
dd: /dev/sa0: Input/output error
0+0 records in
0+0 records out
0 bytes transferred in 0.002930 secs (0 bytes/sec)
... which is a return code of '1' and no messages on the console...
I have, before you ask, tried "bs=10k" and 20k ... but I believe this
command should run by itself fetching the first 512 bytes of each block ---
wrong. you have to specify proper block size or multiple of it.
if you don't remember block size just try.
I am not sure (not used tape for a long) but requesting larger block that
is available should work too.
if you used dump(8) then block size is most probably 32kB.
try restore(8) or tar.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[email protected]"
