On 15/12/2011, at 2:16 AM, Borja Marcos wrote:
>
> On Dec 14, 2011, at 2:09 PM, Hugo Silva wrote:
>
>> Hello,
>>
>> First of all apologies if this has been fixed in RC3. I set this server
>> up with mfsbsd, which is RC1, and didn't get to update the system yet.
>>
>> This box has 6 hdds, a 2-mirror zpool was set up as the root pool, with
>> 2 spares.
>>
>> While testing hot swapping I noticed that while the controller detects
>> disk removal/insertion, the zpool will never recover. The problem seems
>> to be deeper than ZFS, as disklabel/fdisk/etc also fail on the
>> removed-and-reinserted disk.
>>
>> At the ZFS level, doing a zpool clear yields more errors on the removed
>> disk; rebooting becomes the only option to make the pool healthy again.
>>
>>
>> Is this normal? Did I miss any step?
>
> I assume that you have tried to use the H700 as a "JBOD" card, defining
> logical volume for each hard disk.
>
> The problem is: that gorgeous, fantastic, masterful, Nobel award candidate
> card, has a wonderful behavior in that case. If you extract one of the disks,
> the logical volume associated to it is invalidated. So, you insert a
> replacement disk, and the card refuses to recognize the volume. What is even
> worse, in order to recover it's mandatory to reboot the complete system *AND*
> go through the RAID configuration utility.
>
> That's the problem. The card refuses to work as a simple disk controller
> without frills, and the frills get in the way.
>
> To summarize: it isn't FreeBSD's fault, no matter which version you use. It's
> a "feature" coming directly from the geniuses who designed the card.
Hugo: You missed a step. Borja: No reboot required.
For the mfi controllers I have been testing recently (MegaRAID 9261-8i), you
need to install the sysutils/megacli port, and use that to clear the
"foreignness" of the disk you just added. Something like:
MegaCli -CfgForeign -Clear -a0
You should be able to then recreate it as a JBOD device, and progress through
whatever higher level recovery you need to do.
Regards,
Jan Mikkelsen
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[email protected]"
