Hi Nate, On Tuesday 02 December 2003 23:34, Nate Lawson wrote:
> Try other states (acpiconf -s 1, 2, 4). If one works, use it. If not, > try disabling acpi and using apm(4) to suspend and resume. Normally that would be grand, but now that I've not compiled acpi into the kernel, I have no /dev/apm anymore as well. Even with acpi, I never got a /dev/apmctl so apmd never worked. I've read through devfs(5)/(8), but as far as I understand, it is the driver's responsibility to create the device and even if you could do it in userland, than it will just be a non-configured device. I've attached my kernel config and dmesg.boot. Is there anything I'm missing? PS: I can live without suspend2disk, but sleep state S1 does not shutdown my display as well, so I'm pretty much out of options. -- Melvyn ======================================================= FreeBSD sarevok.idg.nl 5.2-BETA FreeBSD 5.2-BETA #0: Wed Dec 3 20:13:44 CET 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SAREVOK_NOACPI i386 =======================================================
# vim600: tw=78 ts=8 sw=8 ai noet # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.393 2003/11/03 22:48:25 jhb Exp $ machine i386 cpu I686_CPU ident SAREVOK #To statically compile in device wiring instead of /boot/device.hints hints "SAREVOK.hints" #Default places to look for devices. makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as /, requires NFSCLIENT options NTFS #NT File System options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current options DDB #Enable the kernel debugger options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # device acpi device isa device eisa device pci # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapicam # emulate ATAPI devices as SCSI ditto # via CAM # needs CAM to be present (scbus & # pass) options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device mpt # LSI-Logic MPT-Fusion device aha # Adaptec 154x SCSI adapters # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # Pcmcia and cardbus bridge support device cbb # cardbus (yenta) bridge #device pcic # ExCA ISA and PCI bridges device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device axe # ASIX Electronics USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) # Audio support device pcm device midi device seq device gusc
# $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.11 2002/12/05 22:49:47 jhb Exp $ hint.ata.0.at="isa" hint.ata.0.port="0x1F0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" hint.adv.0.at="isa" hint.adv.0.disabled="1" hint.bt.0.at="isa" hint.bt.0.disabled="1" hint.aha.0.at="isa" hint.aha.0.disabled="1" hint.aic.0.at="isa" hint.aic.0.disabled="1" hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" hint.atkbd.0.flags="0x1" hint.psm.0.at="atkbdc" hint.psm.0.irq="12" hint.vga.0.at="isa" hint.sc.0.at="isa" hint.sc.0.flags="0x100" hint.vt.0.at="isa" hint.vt.0.disabled="1" hint.apm.0.disabled="0" hint.apm.0.flags="0x20" hint.pcic.0.at="isa" # hint.pcic.0.irq="10" # Default to polling hint.pcic.0.port="0x3e0" hint.pcic.0.maddr="0xd0000" hint.pcic.1.at="isa" hint.pcic.1.irq="11" hint.pcic.1.port="0x3e2" hint.pcic.1.maddr="0xd4000" hint.pcic.1.disabled="1" hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" hint.sio.1.at="isa" hint.sio.1.port="0x2F8" hint.sio.1.irq="3" hint.sio.2.at="isa" hint.sio.2.disabled="1" hint.sio.2.port="0x3E8" hint.sio.2.irq="5" hint.sio.3.at="isa" hint.sio.3.disabled="1" hint.sio.3.port="0x2E8" hint.sio.3.irq="9" hint.ppc.0.at="isa" hint.ppc.0.irq="7" hint.ed.0.at="isa" hint.ed.0.disabled="1" hint.ed.0.port="0x280" hint.ed.0.irq="10" hint.ed.0.maddr="0xd8000" hint.cs.0.at="isa" hint.cs.0.disabled="1" hint.cs.0.port="0x300" hint.sn.0.at="isa" hint.sn.0.disabled="1" hint.sn.0.port="0x300" hint.sn.0.irq="10" hint.ie.0.at="isa" hint.ie.0.disabled="1" hint.ie.0.port="0x300" hint.ie.0.irq="10" hint.ie.0.maddr="0xd0000" hint.fe.0.at="isa" hint.fe.0.disabled="1" hint.fe.0.port="0x300" hint.le.0.at="isa" hint.le.0.disabled="1" hint.le.0.port="0x300" hint.le.0.irq="5" hint.le.0.maddr="0xd0000" hint.lnc.0.at="isa" hint.lnc.0.disabled="1" hint.lnc.0.port="0x280" hint.lnc.0.irq="10" hint.lnc.0.drq="0"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Wed Dec 3 20:13:44 CET 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SAREVOK_NOACPI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0933000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 536535040 (511 MB)
avail memory = 511512576 (487 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc590
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:29 INTA BIOS irq 11
pci_cfgintr: 0:29 INTB BIOS irq 11
pci_cfgintr: 0:29 INTC BIOS irq 11
pci_cfgintr: 0:29 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
agp0: <Intel 82855 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device
29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device
29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device
29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci_cfgintr: 2:0 INTA BIOS irq 11
pci_cfgintr: 2:1 INTA BIOS irq 11
pci_cfgintr: 2:1 INTA BIOS irq 11
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0
on pci2
bfe0: Ethernet address: 00:0d:56:3c:1c:37
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <TI4510 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
fwohci0: vendor=104c, dev=8029
fwohci0: <1394 Open Host Controller Interface> mem
0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 1.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 39:4f:c0:00:39:d2:70:10
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 3a:4f:c0:d2:70:10
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc49dbc60
ad0: 38154MB <IC25N040ATMR04-0> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4241N> at ata1-master PIO4
GEOM: create disk cd0 dp=0xc48c7e00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
pgp00000.pgp
Description: signature
