Hi,
running a kernel from Sat Nov 15 21:58:25 CET 2003, I get the following
messages when resuming from ACPI suspend:
usb0: cannot start
usb1: cannot start
usb2: cannot start
usb0: host system error
usb0: host controller process error
usb0: host controller halted
usb1: host system error
usb1: host controller process error
usb1: host controller halted
usb2: host system error
usb2: host controller process error
usb2: host controller halted
usb3: unrecoverable error, controller halted
usb3: blocking intrs 0x10
uhub3: illegal enable change, port 1
Then the USB ports are dead. Any ideas?
pciconv -lv says:
[EMAIL PROTECTED]:29:0: class=0x0c0300 card=0x052d1014 chip=0x24c28086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #1'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:1: class=0x0c0300 card=0x052d1014 chip=0x24c48086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #2'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:2: class=0x0c0300 card=0x052d1014 chip=0x24c78086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #3'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:7: class=0x0c0320 card=0x052e1014 chip=0x24cd8086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB EHCI Controller'
class = serial bus
subclass = USB
And in the dmesg I get:
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device
29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device
29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device
29.7 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
regards,
le
--
Lukas Ertl eMail: [EMAIL PROTECTED]
UNIX Systemadministrator Tel.: (+43 1) 4277-14073
Vienna University Computer Center Fax.: (+43 1) 4277-9140
University of Vienna http://mailbox.univie.ac.at/~le/
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
