hi
this verbosed dmesg is from my box maybe it help you
have a nice day
--
Archeologists near mount Sinai have discovered what is believed to be a
missing page from the Bible. The page is currently being carbon dated
in Bonn. If genuine it belongs at the beginning of the Bible and is
believed to read "To my darling Candy. All characters portrayed
within this book are fictitous and any resemblance to persons living
or dead is purely coincidental." The page has been universally
condemned by church leaders.
RED DWARF Series II Episode 2, "Better Than Life"
-
R
5 2 D 0x15 3 4 5 7 10 11 14 15
slot 2 5 1 A 0x10 3 4 5 7 10 11 14 15
slot 2 5 1 B 0x11 3 4 5 7 10 11 14 15
slot 2 5 1 C 0x12 3 4 5 7 10 11 14 15
slot 2 5 1 D 0x12 3 4 5 7 10 11 14 15
slot 3 0 1 A 0x16 3 4 5 7 10 11 14 15
slot 3 0 1 B 0x17 3 4 5 7 10 11 14 15
slot 3 0 1 C 0x18 3 4 5 7 10 11 14 15
slot 3 0 1 D 0x19 3 4 5 7 10 11 14 15
slot 4 0 2 A 0x1a 3 4 5 7 10 11 14 15
slot 4 0 2 B 0x1b 3 4 5 7 10 11 14 15
slot 4 0 2 C 0x1a 3 4 5 7 10 11 14 15
slot 4 0 2 D 0x1b 3 4 5 7 10 11 14 15
slot 5 0 3 A 0x1c 3 4 5 7 10 11 14 15
slot 5 0 3 B 0x1d 3 4 5 7 10 11 14 15
slot 5 0 3 C 0x1c 3 4 5 7 10 11 14 15
slot 5 0 3 D 0x1d 3 4 5 7 10 11 14 15
slot 6 0 4 A 0x1e 3 4 5 7 10 11 14 15
slot 6 0 4 B 0x1f 3 4 5 7 10 11 14 15
slot 6 0 4 C 0x1e 3 4 5 7 10 11 14 15
slot 6 0 4 D 0x1f 3 4 5 7 10 11 14 15
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNK6 irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.0
\\_SB_.LNK7 irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.1
\\_SB_.LNK8 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.2
\\_SB_.LNK9 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.3
\\_SB_.LNKA irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.2
\\_SB_.LNKB irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.3
\\_SB_.LNKC irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.0
\\_SB_.LNKD irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.1
\\_SB_.LNKC irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.2
\\_SB_.LNKD irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.3
\\_SB_.LNKE irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.0
\\_SB_.LNKF irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.1
\\_SB_.LNKE irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.2
\\_SB_.LNKF irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.3
\\_SB_.LNKG irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.15.0
---- before setting priority for links ------------
\\_SB_.LNKA:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 0
\\_SB_.LNKB:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 0
\\_SB_.LNKC:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 0
\\_SB_.LNKD:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 0
\\_SB_.LNKF:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKA:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 8125
\\_SB_.LNKB:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 8125
\\_SB_.LNKC:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 8125
\\_SB_.LNKD:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 8125
\\_SB_.LNKF:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2100 2100 1400 2100 1200 1400 11100 11100
references: 2
priority: 8125
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNK6 irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.0
\\_SB_.LNK7 irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.1
\\_SB_.LNK8 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.2
\\_SB_.LNK9 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.1.3
\\_SB_.LNKA irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.2
\\_SB_.LNKB irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.2.3
\\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.0
\\_SB_.LNKD irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.1
\\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.2
\\_SB_.LNKD irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.3.3
\\_SB_.LNKE irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.0
\\_SB_.LNKF irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.1
\\_SB_.LNKE irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.2
\\_SB_.LNKF irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.4.3
\\_SB_.LNKG irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 0.15.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0024, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00002000, size 7, enabled
map[14]: type 1, range 32, base b1500000, size 7, enabled
pcib0: matched entry for 0.4.INTA (source \\_SB_.LNKE)
pcib0: slot 4 INTA is routed to irq 11
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[90]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x51
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002080, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base b1400000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.LNKG)
pcib0: slot 15 INTA is routed to irq 5
found-> vendor=0x1166, dev=0x0220, revid=0x04
bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=5
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0x1fff
pcib1: memory decode 0xb0000000-0xb13fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base b1100000, size 12, enabled
map[14]: type 4, range 32, base 00001800, size 6, enabled
map[18]: type 1, range 32, base b1000000, size 20, enabled
pcib0: matched entry for 0.1.INTB (source \\_SB_.LNK7)
pcib0: slot 1 INTB is routed to irq 11
pcib1: slot 5 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=1, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 24, enabled
map[14]: type 4, range 32, base 00001000, size 8, enabled
map[18]: type 1, range 32, base b1200000, size 12, enabled
pcib0: matched entry for 0.1.INTC (source \\_SB_.LNK8)
pcib0: slot 1 INTC is routed to irq 5
pcib1: slot 6 INTA is routed to irq 5
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=6, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base b1300000, size 8, enabled
pcib0: matched entry for 0.1.INTD (source \\_SB_.LNK9)
pcib0: slot 1 INTD is routed to irq 5
pcib1: slot 7 INTA is routed to irq 5
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=1, slot=7, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 00001850, size 3, enabled
map[14]: type 4, range 32, base 00001860, size 2, enabled
map[18]: type 4, range 32, base 00001858, size 3, enabled
map[1c]: type 4, range 32, base 00001864, size 2, enabled
map[20]: type 4, range 32, base 00001840, size 4, enabled
pcib0: matched entry for 0.1.INTA (source \\_SB_.LNK6)
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 8 INTA is routed to irq 10
found-> vendor=0x1095, dev=0x0649, revid=0x02
bus=1, slot=8, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem
0xb1000000-0xb10fffff,0xb1100000-0xb1100fff irq 11 at device 5.0 on pci1
pcib1: device fxp0 requested decoded memory range 0xb1100000-0xb1100fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:50:8b:e9:e8:92
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pci1: <display, VGA> at device 6.0 (no driver attached)
pci1: <base peripheral> at device 7.0 (no driver attached)
atapci0: <CMD 649 UDMA100 controller> port
0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device
8.0 on pci1
pcib1: device atapci0 requested decoded I/O range 0x1840-0x184f
atapci0: [MPSAFE]
pcib1: device atapci0 requested decoded I/O range 0x1850-0x1857
pcib1: device atapci0 requested decoded I/O range 0x1860-0x1863
pcib1: device atapci0 requested decoded I/O range 0x1862-0x1862
ata2: reset tp1 mask=03 ostat0=50 ostat1=51
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: at 0x1850 on atapci0
ata2: [MPSAFE]
pcib1: device atapci0 requested decoded I/O range 0x1858-0x185f
pcib1: device atapci0 requested decoded I/O range 0x1864-0x1867
pcib1: device atapci0 requested decoded I/O range 0x1866-0x1866
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0
ata3: at 0x1858 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb1500000-0xb150007f
irq 11 at device 4.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:04:76:9d:0c:cd
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
isab0: <PCI-ISA bridge> port 0xfc00-0xfc0f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x2080-0x208f at device 15.1 on
pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib2: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\\_SB_.LNK0 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.0
\\_SB_.LNK1 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.1
\\_SB_.LNK2 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.2
\\_SB_.LNK2 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.3
\\_SB_.LNK3 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.0
\\_SB_.LNK4 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.1
\\_SB_.LNK5 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.2
\\_SB_.LNK5 irq 0: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.3
---- before setting priority for links ------------
\\_SB_.LNK0:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 0
\\_SB_.LNK1:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 0
\\_SB_.LNK2:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 2
priority: 0
\\_SB_.LNK3:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 0
\\_SB_.LNK4:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 0
\\_SB_.LNK5:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 2
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNK2:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 2
priority: 10135
\\_SB_.LNK5:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 2
priority: 10135
\\_SB_.LNK0:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 5067
\\_SB_.LNK1:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 5067
\\_SB_.LNK3:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 5067
\\_SB_.LNK4:
interrupts: 3 4 5 7 10 11 14 15
penalty: 2980 2980 2480 2980 2480 2680 11980 11980
references: 1
priority: 5067
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNK0 irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.0
\\_SB_.LNK1 irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.1
\\_SB_.LNK2 irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.2
\\_SB_.LNK2 irq 10: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.1.3
\\_SB_.LNK3 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.0
\\_SB_.LNK4 irq 11: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.1
\\_SB_.LNK5 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.2
\\_SB_.LNK5 irq 5: [ 3 4 5 7 10 11 14 15] low,level,sharable 5.2.3
pci5: <ACPI PCI bus> on pcib2
pci5: physical bus=5
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39a40 StartNode 0xc2d39a40 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.KBD_._STA] (Node
0xc2d39a40), AE_NOT_FOUND
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.IBRG.SMIC] in namespace, AE_NOT_FOUND
SearchNode 0xc2d39980 StartNode 0xc2d39980 ReturnNode 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IBRG.PS2M._STA] (Node
0xc2d39980), AE_NOT_FOUND
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xe8000-0xeffff,0xd2000-0xdcfff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc0000-0xc7fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 927105994 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
acd0: setting PIO4 on ServerWorks ROSB4 chip
acd0: <Compaq CRD-8402B/1.03> CDROM drive at ata0 as master
acd0: read 6875KB/s (6875KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad4: setting UDMA100 on CMD 649 chip
GEOM: create disk ad4 dp=0xc2e30470
ad4: <WDC WD400BB-00CLB0/05.04E05> ATA-5 disk at ata2-master
ad4: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 40015954944 end 40015987199
ad5: setting UDMA100 on CMD 649 chip
GEOM: create disk ad5 dp=0xc2e30270
ad5: <WDC WD400BB-00CLB0/05.04E05> ATA-5 disk at ata2-slave
ad5: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad4s1a, start 28991029248 length 11024925696 end 40015954943
GEOM: Configure ad4s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad4s1e, start 0 length 2147483648 end 2147483647
GEOM: Configure ad4s1f, start 2147483648 length 5368709120 end 7516192767
GEOM: Configure ad4s1g, start 7516192768 length 21474836480 end 28991029247
GEOM: new disk ad5
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad5s1a, start 20401094656 length 3221225472 end 23622320127
GEOM: Configure ad5s1b, start 2147483648 length 2147483648 end 4294967295
GEOM: Configure ad5s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad5s1d, start 23622320128 length 16393634816 end 40015954943
GEOM: Configure ad5s1e, start 0 length 2147483648 end 2147483647
GEOM: Configure ad5s1f, start 4294967296 length 5368709120 end 9663676415
GEOM: Configure ad5s1g, start 9663676416 length 5368709120 end 15032385535
GEOM: Configure ad5s1h, start 15032385536 length 5368709120 end 20401094655
Mounting root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
WARNING: /export was not properly dismounted
WARNING: /root was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /backhome was not properly dismounted
WARNING: /var/mail was not properly dismounted
WARNING: /var/www was not properly dismounted
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
