Bernd Walter wrote:
On Sun, Oct 05, 2003 at 10:39:14PM -0700, Doug White wrote:

On Sun, 5 Oct 2003, Matt wrote:


I have a fuji digital camera which has always previously worked with
-current no problems. However I have not tried to copy images from it
for a couple of months now.

[...]



Oct  5 23:02:58 heather kernel: umass0: Fuji Photo Film USB Mass
Storage, rev 1.10/10.00, addr 3
Oct  5 23:02:59 heather kernel: GEOM: create disk da0 dp=0xc40abc50
Oct  5 23:02:59 heather kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Oct  5 23:02:59 heather kernel: da0: <FUJIFILM USB-DRIVEUNIT 1.00>
Removable Direct Access SCSI-0 device
Oct  5 23:02:59 heather kernel: da0: 1.000MB/s transfers
Oct  5 23:02:59 heather kernel: da0: 62MB (128000 512 byte sectors: 64H
32S/T 62C)

Which USB controller? There are known issues with the ohci driver at current.


Could you please test to copy the disk with dd and bs=512?
The resulting file can be made mountable using mdconfig.
If this is the same problem then the dd copy should work, otherwise
we have another problem.


[EMAIL PROTECTED] root]# dd if=/dev/da0s1 of=/root/blah bs=512 dd: /dev/da0s1: Input/output error 63646+0 records in 63646+0 records out 32586752 bytes transferred in 812.878115 secs (40088 bytes/sec) [EMAIL PROTECTED] root]# mdconfig -a -t vnode -f /root/blah md0 [EMAIL PROTECTED] root]# mount /dev/md0 /mnt mount: /dev/md0 on /mnt: incorrect super block [EMAIL PROTECTED] root]# ls -al blah -rw-r--r-- 1 root wheel 32586752 Oct 6 19:22 blah

The dd took a good 10 minutes and was transferring lots of data over the link before it gave that i/o error.

So not sure. Is this the problem you have seen before or a new problem?

This camera DID used to work perfectly on freebsd 4.x and -current up until recently.

Matt.

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to