None of the previous posts on this seem to describe exactly what I'm seeing:
5.1-REL always detects the secondary drive. 5.1-CUR never detects the secondary. 5.1-CUR + ata-lowlevel 1.11 detects it the FIRST time it's booted immediately after 5.1-REL. Always. On subsequent boots, no luck. A = 1st CUR + ata-lowlevel 1.11 after running REL. B = 2nd and following boots of same. B ata0-slave: stat=0x10 err=0x01 lsb=0x00 msb=0x00 A ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 A ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> B ata0: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER> A ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin A ad1: setting UDMA100 on Intel ICH4 chip A ad1: <ST340014A/3.06> ATA-6 disk at ata0-slave I'll provide more info or try something different if it might help. -barry _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
