On Sun, 2003-10-05 at 00:44, Bernd Walter wrote:
> You need to have intpm hardware to get this driver working.
> There are other drivers available depending on your chipset.
> What is the pciconf -lv output?
There you go:
====================================================
[EMAIL PROTECTED]:0:0: class=0x060000 card=0x00000000 chip=0x700e1022 rev=0x13
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-761 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x00000000 chip=0x700f1022 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-761 CPU to AGP Bridge (AGP 4x)'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:7:0: class=0x060100 card=0x06861106 chip=0x06861106 rev=0x40
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686/A/B "Super South" PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:7:1: class=0x01018a card=0x05711106 chip=0x05711106
rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:7:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:7:4: class=0x0c0500 card=0x30571106 chip=0x30571106 rev=0x40
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686A/B ACPI Power Management Controller'
class = serial bus
subclass = SMBus
[EMAIL PROTECTED]:10:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
class = network
subclass = ethernet
[EMAIL PROTECTED]:14:0: class=0x040100 card=0x20001274 chip=0x58801274 rev=0x02
hdr=0x00
vendor = 'Creative (Was: Ensoniq)'
device = '5880 AudioPCI'
class = multimedia
subclass = audio
[EMAIL PROTECTED]:5:0: class=0x030000 card=0x87001462 chip=0x025310de
rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GeForce4 Ti 4200 [NV25.4]'
class = display
subclass = VGA
====================================================
> > Investingating further, I see that I have no "/dev/smb" on my system
> > even though I have "device smb" in my kernel config. I've also noticed a
> > line saying "pci0: <serial bus, SMBus> at device 7.4 (no driver
> > attached)" in my dmesg.
>
> So it's no intpm hardware.
What drivers should I be using then ? I had lm_sensors on Linux work
with this hardware...
Sincerely,
Dan Naumov
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
