I've had similar problem with Avaya Gold which is also Lucent-card. I replaced my Prism2 card with a Lucent card yesterday just to test it on -CURRENT. But when I put a Compaq WL110 card, shit started to work again. I did not debug problems with the Avaya card. I will today. It's possible I've messed up my setup which i later corrected with the Compaq card. Be sure you use the same wep key as the one you have on your server/gw. I.e when I just set my wep key nothing worked, but when I told ifconfig to use key number 3 (that's what's set up on my gw) things started to work again. And I set up my IP manually. I will also check it dhclient can receive requests.
Cheers On Thu, 21 Aug 2003 16:34:20 -0400 "Michael Goffin" <[EMAIL PROTECTED]> wrote: > Does anyone know if Orinoco Gold cards just don't work in 5.1-current, or if > there is something special you have to do? I had the card working when I had > 5.0-release without having to compile with OLDCARD. That install got really > bad so I went to 5.1-release and cvsup'd to 5.1-current this morning > compiling without OLDCARD. When I kill dhclient, set my ssid, then attempt > to run dhclient again, it fails. I have received several error messages > about bytes not clearing, the device being busy, and the input type being > wrong. > > I'm using an IBM thinkpad T20. Any ideas on how to get the card to work? > > Mike > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
