All,
Some progress to report - ran top -S as suggested, and could see the two idle
threads, one per physical CPU. The second idle thread was halted but on cpu
#1 (the second cpu).
sysctl machdep.halt_logical_cpus=0. Both CPU threads are active, occupying
~100% of thier respective cpus. Run my infinite loop program. Occupies 100%
of cpu #1, system load 50%. Start second instance, occupies 100% of cpu 0.
Good! Its working.
Conclusion in my case setting sysctl machdep.halt_logical_cpus=1 effectively
halts my second CPU. Maybe it thought it was a second core in the first CPU?
For Doug, thanks for the suggestions. Flashed the BIOS with no effect. Mptable
attached.
I'm happy to test any patches arising from this...
Cheers All.
Brendon
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f4f90
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x7d
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f1400
signature: 'PCMP'
base table length: 316
version: 1.4
checksum: 0x77
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 31
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 15 2 4 0xfbff
1 0x11 AP, usable 15 2 4 0xfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 ISA
--
I/O APICs: APIC ID Version State Address
4 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 0 31:B 4 17
INT active-lo level 0 31:D 4 19
INT active-lo level 0 31:C 4 23
INT active-lo level 4 7:A 4 16
INT active-lo level 4 1:A 4 17
INT active-lo level 1 0:A 4 22
INT active-lo level 4 4:A 4 16
INT active-lo level 0 31:A 4 16
ExtINT conforms conforms 5 0 4 0
INT conforms conforms 5 1 4 1
INT conforms conforms 5 0 4 2
INT conforms conforms 5 3 4 3
INT conforms conforms 5 4 4 4
INT conforms conforms 5 6 4 6
INT conforms conforms 5 7 4 7
INT active-hi edge 5 8 4 8
INT conforms conforms 5 12 4 12
INT conforms conforms 5 13 4 13
INT conforms conforms 5 14 4 14
INT conforms conforms 5 15 4 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
===============================================================================
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
